2025年05月20日 星期二 首页   |    期刊介绍   |    编 委 会   |    投稿指南   |    期刊订阅   |    统合信息   |    联系我们
计量学报  2013, Vol. 34 Issue (6): 541-544    DOI: 10.3969/j.issn.1000-1158.2013.06.07
  本期目录 | 过刊浏览 | 高级检索 |
金属夏比V型缺口标准试样的研制
陈龙,张宝珠,韩超,骆昕,彭铁军
北京市计量检测科学研究院, 北京 100029
Development of Metal Charpy V-notch Standard Specimen
CHEN Long,ZHANG Bao-zhu,HAN Chao,LUO Xin,PENG Tie-jun
Beijing Institute of Metrology, Beijing 100029, China
全文: PDF (2093 KB)   HTML (1 KB) 
输出: BibTeX | EndNote (RIS)      
摘要 介绍了金属夏比V型缺口标准试样的研制原理,采用40CrNiMo制做了低能量和中能量两个能量级的标准试样,并在国家基准冲击试验机上进行试验。结果表明,低能量标准试样的平均冲击值为24.84 J,标准偏差为1.4 J,半年稳定性为0.7%;中能级标准块的平均冲击值为97.51 J,相对标准偏差为3.0%,半年稳定性为0.8%,符合国家标准GB/T 18658-2002要求,实现了冲击能基准量值传递的目标。同时分析了冲击试样加工工艺及其形貌、相结构对冲击能量值的影响。
服务
把本文推荐给朋友
加入我的书架
加入引用管理器
E-mail Alert
RSS
作者相关文章
陈龙
张宝珠
韩超
骆昕
彭铁军
关键词 计量学标准冲击试样标准偏差长期稳定性相结构    
Abstract:The principle of development of metal Charpy V-notch standard specimen is described.Low energy grade and medium energy grade are produced from material of 40CrNiMo and tested using national benchmark impact tester.The results show that for low energy grade specimen, the average impact value is 24.836 J with the standard deviation is 1.4 J and stability during half year is 0.7%. For medium energy grade specimen, the average impact value is 97.514 J with the standard deviation is 3.0% and stability during half year is 0.8%.Both meet the requirements of national standard GB/T 18658-2002 and realize the transfer of impact energy reference value?Further the effects of process of development, microstructure and phase structure on impact energy value are analyzed.
Key wordsMetrology    Standard impact specimen    Standard deviation    Long-term stability    Phase structure
    
基金资助:国家质检总局科技计划项目(2009QK030)
作者简介: 陈龙(1981-),男,山西朔州人,北京市计量检测科学研究院工程师,博士研究生,主要从事材料力学分析,力值检测等方面的工作。clong113@163.com
引用本文:   
陈龙,张宝珠,韩超,骆昕,彭铁军. 金属夏比V型缺口标准试样的研制[J]. 计量学报, 2013, 34(6): 541-544.
CHEN Long,ZHANG Bao-zhu,HAN Chao,LUO Xin,PENG Tie-jun. Development of Metal Charpy V-notch Standard Specimen. Acta Metrologica Sinica, 2013, 34(6): 541-544.
链接本文:  
http://jlxb.china-csm.org:81/Jwk_jlxb/CN/10.3969/j.issn.1000-1158.2013.06.07     或     http://jlxb.china-csm.org:81/Jwk_jlxb/CN/Y2013/V34/I6/541
京ICP备:14006989号-1
版权所有 © 《计量学报》编辑部
地址:北三环东路18号(北京1413信箱)  邮编:100029 电话:(010)64271480
本系统由北京玛格泰克科技发展有限公司设计开发  技术支持:support@magtech.com.cn