Abstract：It has a direct effect on profile deviation and pitch deviation for the installation eccentricity in the measurement of the gearwheel．According to the relationship between installation eccentricity and meshing line increment,the mathematical model of the meshing line increment which is generated by the installation eccentricity is established．The mathematical models of compensation on profile deviation,pitch deviation and cumulative pitch deviation are presented．Through the experiment of measuring gear involute master and master gear installed eccentrically,the validity of compensation models are verified．Finally,applications of compensation models are given.
郭敬滨,张大厦,张继承,周广才. 大齿轮测量中补偿安装偏心的研究[J]. 计量学报, 2011, 32(2): 118-122.
GUO Jing-bin,ZHANG Da-sha,ZHANG Ji-cheng,ZHOU Guang-cai. Research on Compensation of the Installation Eccentricity in the Gearwheel Measurement. Acta Metrologica Sinica, 2011, 32(2): 118-122.
［1］Oiwa T, Yoshida O. In-process measurement for gear eccentricity［J］. Journal of the Japan Society for Precision Engineering, 2002, 68(2): 244.
［2］Kurokawa S, Ariura Y. Transmission error analysis of involute cylindrical gears with radial eccentricity-Measurement of eccentricity and the influence of cumulative pitch deviations［J］. VDI-Berichte, 2002, 2(1665): 1003-1017.
［3］Chekanov V E. Measurement of radial runout and pitch of gears with internal teech［J］. Soviet engineering research, 1989, 9(12), 12-13.
［4］刘健,等．鞍点规划与形位误差评定［M］．大连:大连理工大学出版社,1996,229-231.
［5］庄葆华,李真．近代齿轮测量技术与仪器［M］．北京:机械工业出版社,1986,16-107.
［6］严军,石照耀．求解齿轮齿廓误差的新算法［J］．工具技术,1999,33(2),37-38.
［7］Munro R G, Linq P H K. New method of measuring involute profile deviations of gear teeth. Proceedings of the Institution of Mechanical Engineers［J］. Journal of Mechanical Engineering Science, 1996, 210(1), 63-67.
［8］Jin J Q, Duan Z Y, Wang Q, et al. In-suit integrated measurement of profile precision of large gears based on rack-shaped-edge probe［J］. International Journal of Materials and Product Technology, 2008, 31(1), 97-105.
［9］单光坤,李文龙．大型齿轮在机测量中安装偏心的测定及补偿［J］．机械传动,2003,27(2):48-50.
2011, Vol. 32 
