卧式储油罐罐容表标定的数学模型研究

doi:10.3969/j.issn.1000-1158.2012.03.10

摘要
图/表
参考文献(8)
相关文章 (15)

全文: PDF (396 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要针对卧式储油罐罐体发生纵向倾斜和横向偏转引起油面位置的3种不同高度,分别建立了储油体积与油位高度以及倾斜角度和偏转角度之间的积分方程,并给出罐体变位后的储油体积标定值。结果表明:该模型比较全面地反应了实际状况,为储油罐发生变位后的罐容表重新制定提供了一种可行的方法。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	钟桦
	王朝

关键词 ：计量学, 卧式储油罐, 罐容表, 积分方程模型

Abstract：In order to deal with the problems of longitudinal inclination and lateral deflection of horizontal oil tanks, an integral equation model by analyzing different levels of the oil surface is built up, which illuminates the relationship between the storage volume and oil level, as well as the inclination angle and the deflection angle. The results show that this model comprehensively reflects the real situation which present the calibration value of the oil storage when tank body is displaced, and provides a renewed and feasible solution to the displaced volume table of oil tank.

Key words： Metrology Horizontal oil tank Tank capacity table Integral equation model

PACS:

TB938.3

作者简介: 钟桦（1980- ）,女,重庆人,重庆科技学院讲师,博士研究生,主要研究方向为应用数学。zhonghua_cty@163.com

引用本文:

钟桦,王朝. 卧式储油罐罐容表标定的数学模型研究[J]. 计量学报, 2012, 33(3): 236-239.
ZHONG Hua,WANG Chao. Study on the Mathematical Model of the Calibration Value of Horizontal Oil Tanks. Acta Metrologica Sinica, 2012, 33(3): 236-239.

链接本文:

http://jlxb.china-csm.org:81/Jwk_jlxb/CN/10.3969/j.issn.1000-1158.2012.03.10 或 http://jlxb.china-csm.org:81/Jwk_jlxb/CN/Y2012/V33/I3/236