Abstract:In order to further improve the reconstruction accuracy of temperature distribution based on acoustic tomography, an error function (ERF) with small deviation is introduced to improve the sparse reconstruction model, and the iterative reweighting algorithm is used to further optimize the model. Finally, the alternating direction multiplier algorithm (ADMM) is used to solve the model, so as to complete the reconstruction of temperature distribution. Simulation and experimental tests are carried out and compared with LASSO, ART and Landweber algorithms. In the simulation experiment, the reconstruction quality of temperature distribution based on ERF model is the best, with the average relative error and root mean square error of 0.1% and 0.14% respectively. In the experimental testing, the average absolute value of the reconstruction temperature error at the set temperature point is the smallest, 0.043%, which is significantly smaller than the other three algorithms.
JIA R, XIONG Q, XU G, et al. A method for two-dimensional temperature field distribution reconstruction [J]. Applied Thermal Engineering, 2017, 111: 961-967.
LIU X, BANSAL R C. Integrating multi-objective optimization with computational fluid dynamics to optimize boiler combustion process of a coal fired power plant [J]. Applied Energy, 2014, 130: 658-669.
CHEN Q Q, PAN J, YUAN D K. Development of a New High Temperature Thermocouple Performance Testing System [J]. Acta Metrologica Sinica, 2022, 43 (11): 1424-1430.
[5]
GREEN S. An acoustic technique for rapid temperature distribution measurement [J]. The Journal of the Acoustical Society of America, 1985, 77 (2): 759-763.
[6]
YAN H, MA Z, ZHOU Y G. Acoustic tomography system for online monitoring of temperature fields [J]. IET Science, Measurement & Technology, 2017, 11 (5): 623-630.
[8]
KONG Q, JIANG G, LIU Y, et al. Numerical and experimental study on temperature field reconstruction based on acoustic tomography [J]. Applied Thermal Engineering, 2020, 170: 114720.
[10]
LIU S, LIU S, REN T. Acoustic tomography reconstruction method for the temperature distribution measurement [J]. IEEE Transactions on Instrumentation and Measurement, 2017, 66 (8): 1936-1945.
[11]
YAN H, WEI Y K, ZHOU Y G, et al. Temperature Distribution Reconstruction Method for Acoustic Tomography Based on Compressed Sensing [J]. Ultrason Imaging, 2022, 44 (2-3): 77-95.
[9]
WANG H, ZHOU X, YANG Q, et al. A reconstruction method of boiler furnace temperature distribution based on acoustic measurement [J]. IEEE Transactions on Instrumentation and Measurement, 2021, 70: 1-13.
[13]
GUO W, LOU Y, QIN J, et al. A Novel Regularization Based on the Error Function for Sparse Recovery [J]. Journal of Scientific Computing, 2021, 87 (1): 31-53.
[15]
OCHS P, DOSOVITSKIY A, BROX T, et al. On iteratively reweighted algorithms for nonsmooth nonconvex optimization in computer vision [J]. SIAM Journal on Imaging Sciences, 2015, 8 (1): 331-372.
ZHANG L F, MIAO Y. A High Resolution Reconstruction Method of Temperature Distribution in Acoustic Tomography [J]. Journal of System Simulation, 2022, 34 (9): 2065-2073.
[12]
WEI Y K, YAN H, ZHOU Y G. Temperature Field Reconstruction Method for Acoustic Tomography Based on Multi-Dictionary Learning [J]. Sensors, 2023, 23 (1): 208-225.
[14]
CANDES E J, WAKIN M B, BOYD S P. Enhancing sparsity by reweighted l1 minimization [J]. Journal of Fourier analysis and applications, 2008, 14: 877-905.
[16]
ZHANG L F, LI J. Acoustic Tomography Temperature Reconstruction Based on Virtual Observation and Residual Network [J]. IEEE Sensors Journal, 2022, 22 (17): 17054-17064.