2025年04月07日 星期一 首页   |    期刊介绍   |    编 委 会   |    投稿指南   |    期刊订阅   |    统合信息   |    联系我们
计量学报  2024, Vol. 45 Issue (2): 178-185    DOI: 10.3969/j.issn.1000-1158.2024.02.06
  几何量计量 本期目录 | 过刊浏览 | 高级检索 |
非匀速条件下车辆底盘超近距成像测量方法
张月莹1,殷其昊2,荆根强2,颜露新3,王相勋2
1.浙江省机电产品质量检测所有限公司,浙江 杭州310051
2.交通运输部公路科学研究所,北京100088
3.华中科技大学多谱信息智能处理技术全国重点实验室,湖北 武汉430074
Ultra-close Vehicle Chassis Imaging Measurement under Non-uniform Speed
ZHANG Yueying1,YIN Qihao2,JING Genqiang2,YAN Luxin3,WANG Xiangxun2
1. Zhejiang Testing & Inspection Institute for Mechanical and Electrical Products Quality Co. Ltd,  Hangzhou,
 Zhejiang 310051, China
2. Research Institute of Highway, Ministry of Transport, Beijing 100088, China
3. National Key Lab of Multispectral Information Intelligent Processing Technology,Huazhong University of Science and Technology, Wuhan, Hubei 430074, China
全文: PDF (741 KB)   HTML (1 KB) 
输出: BibTeX | EndNote (RIS)      
摘要 针对车辆非匀速条件下轴距视觉测量及轴型识别所面临的超近距、大幅面、低畸变成像及视觉测量问题,提出一种适用于非匀速条件下的车辆底盘结构超近距成像测量方法。利用鱼眼相机采集运动车辆底盘的超广角图像序列,通过一种改进的多采样点圆拟合方法实现图像感兴趣区域的提取。建立三维等距成像模型对鱼眼图像进行畸变校正。针对车辆非匀速行驶带来的视频帧重叠度差异,采用基于图像内容的重叠度分析技术,实现了多步分层的关键帧提取,有效避免了车速不稳定对车辆底盘结构测量的影响。现场实验结果表明:该方法可在非匀速条件下,以20~50cm的成像距离获得清晰、低畸变的完整车辆底盘图像,车辆轴距测量误差均值约为5%。
服务
把本文推荐给朋友
加入我的书架
加入引用管理器
E-mail Alert
RSS
作者相关文章
张月莹
殷其昊
荆根强
颜露新
王相勋
关键词 几何量计量车辆底盘测量非匀速机器视觉图像拼接视频关键帧鱼眼成像校正    
Abstract:Aiming at the technical problems of axle-type recognition under the condition of non-uniform vehicle speed, such as ultra-close distance, large area, and low distortion imaging, a method of ultra-close imaging correction and mosaic for vehicle chassis with speed-adaptive ability is proposed. The ultra-wide-angle image sequences of a moving vehicle chassis are collected by a fish-eye camera, and a method of circle fitting by multi-sample points is proposed to extract the region of interest (ROI). The method for image distortion correction is then performed using an isometric projection model based on the 3D imaging geometry model. Aiming at the problem of vehicles non-uniform speed, which leads to large range of the overlap area between videos adjacent frames, a multi-step layered key frame extraction is carried out with image content overlap analysis technology, avoiding the influence of uneven image distribution on mosaic results. The experimental results show that the proposed method can obtain clear and complete vehicle chassis images with lower distortion at the distance of 20~50cm under the condition of non-uniform vehicle speed, with a 5% average measuring error of the vehicle axles distance.
Key wordsgeometric measurement    vehicle chassis measurement    non-uniform speed    machine vision    image mosaic    video key frames    fish-eye image correction
收稿日期: 2023-05-04      发布日期: 2024-02-21
PACS:  TB921  
基金资助:国家重点研发计划(2021YFF0600205),交通运输部交通强国试点项目(QG2021-4-20-1)
通讯作者: 殷其昊(1991-),江苏沭阳人,交通运输部公路科学研究院助理研究员,博士,主要从事智能仪器、精密测试研究。Email:qh.yin@rioh.cn     E-mail: qh.yin@rioh.cn
作者简介: 张月莹(1985-),浙江杭州人,浙江省机电产品质量检测所有限公司高级工程师,主要从事机电工程测试技术及仪器系统研究。Email:79785786@qq.com
引用本文:   
张月莹,殷其昊,荆根强,颜露新,王相勋. 非匀速条件下车辆底盘超近距成像测量方法[J]. 计量学报, 2024, 45(2): 178-185.
ZHANG Yueying,YIN Qihao,JING Genqiang,YAN Luxin,WANG Xiangxun. Ultra-close Vehicle Chassis Imaging Measurement under Non-uniform Speed. Acta Metrologica Sinica, 2024, 45(2): 178-185.
链接本文:  
http://jlxb.china-csm.org:81/Jwk_jlxb/CN/10.3969/j.issn.1000-1158.2024.02.06     或     http://jlxb.china-csm.org:81/Jwk_jlxb/CN/Y2024/V45/I2/178
京ICP备:14006989号-1
版权所有 © 《计量学报》编辑部
地址:北三环东路18号(北京1413信箱)  邮编:100029 电话:(010)64271480
本系统由北京玛格泰克科技发展有限公司设计开发  技术支持:support@magtech.com.cn