2025年04月10日 星期四 首页   |    期刊介绍   |    编 委 会   |    投稿指南   |    期刊订阅   |    统合信息   |    联系我们
计量学报  2023, Vol. 44 Issue (9): 1473-1478    DOI: 10.3969/j.issn.1000-1158.2023.09.23
  电离辐射、化学计量与生物计量 本期目录 | 过刊浏览 | 高级检索 |
气腹机计量检测装置
吴思圻,洪宝玉,胡志雄,马雪然,卞昕,刘文丽
中国计量科学研究院, 北京 100029
Calibration Device for Insufflator
WU Si-qi,HONG Bao-yu,HU Zhi-xiong,MA Xue-ran,BIAN Xin,LIU Wen-li
National Institute of Metrology, Beijing 100029,China
全文: PDF (485 KB)   HTML (1 KB) 
输出: BibTeX | EndNote (RIS)      
摘要 基于气腹机工作原理及相关计量技术规范开展气腹机校准方法的研究,建立模拟腹腔系统,搭建气腹机计量检测装置。重点论述气腹机计量检测装置的软硬件功能架构,采用自动化测量程序实现了气腹机的智能化计量校准。针对一款典型的气腹机,开展计量校准检测并进行不确定度评定,气压设置值误差扩展不确定度为77.02Pa(k=2),流量显示值误差扩展不确定度为5.98%(k=2),结果表明研制的气腹机计量检测装置能够应用于气腹机性能检测。
服务
把本文推荐给朋友
加入我的书架
加入引用管理器
E-mail Alert
RSS
作者相关文章
吴思圻
洪宝玉
胡志雄
马雪然
卞昕
刘文丽
关键词 计量学气腹机计量检测装置不确定度智能化校准    
Abstract:Based on the working principle of insufflator and relevant measurement technical specifications, the research on the calibration method of insufflator is carried out, a simulated abdominal cavity system is established, and the calibration device of insufflator is built. Software and hardware functional architecture of the calibration device of insufflator are elaborated,intelligent calibration of insufflator is realized by utilizing automatic measurement program.A typical insufflator model is calibrated and the uncertainty is evaluated. The expanded uncertainty of air pressure set value error is 77.02Pa(k=2), and the expanded uncertainty of flow display value error is 5.98% (k=2).The results show that the developed calibration device of insufflator can be applied to the performance testing of insufflator.
Key wordsmetrology    insufflator    calibration device    uncertainty;intelligent calibration
收稿日期: 2022-03-25      发布日期: 2023-09-21
PACS:  TB99  
  TB935  
基金资助:国家重点研发计划(2016YFF0201001)
通讯作者: 胡志雄(1983-),湖北黄冈人,中国计量科学研究院副研究员,主要从事医用光学与医学计量方面的研究。Email: huzhixiong@nim.ac.cn     E-mail: huzhixiong@nim.ac.cn
作者简介: 吴思圻(1994-),福建莆田人,中国计量科学研究院助理工程师,研究方向为医学计量。Email: wusq@nim.ac.cn
引用本文:   
吴思圻,洪宝玉,胡志雄,马雪然,卞昕,刘文丽. 气腹机计量检测装置[J]. 计量学报, 2023, 44(9): 1473-1478.
WU Si-qi,HONG Bao-yu,HU Zhi-xiong,MA Xue-ran,BIAN Xin,LIU Wen-li. Calibration Device for Insufflator. Acta Metrologica Sinica, 2023, 44(9): 1473-1478.
链接本文:  
http://jlxb.china-csm.org:81/Jwk_jlxb/CN/10.3969/j.issn.1000-1158.2023.09.23     或     http://jlxb.china-csm.org:81/Jwk_jlxb/CN/Y2023/V44/I9/1473
京ICP备:14006989号-1
版权所有 © 《计量学报》编辑部
地址:北三环东路18号(北京1413信箱)  邮编:100029 电话:(010)64271480
本系统由北京玛格泰克科技发展有限公司设计开发  技术支持:support@magtech.com.cn