一种低信噪比正弦信号高精度频率测量方法

doi:10.3969/j.issn.1000-1158.2015.02.22

摘要
图/表
参考文献(9)
相关文章 (15)

全文: PDF (2369 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要在研究噪声对低信噪比正弦信号频率测量的影响、分析触发误差对多周期同步频率测量影响的基础上,提出了一种多-多周期同步频率测量方法,推导了频率测量计算公式和误差计算公式,并对两种测频方法的触发误差做了对比分析;最后给出了用STM32单片机实现多-多周期同步频率测量的方法。实验表明:该方法能有效压制噪声,提高低信噪比正弦信号频率测量精度。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	谭超
	邾玢鑫

关键词 ：计量学, 频率测量, 多-多周期同步测频, 信噪比, 触发误差

Abstract：The effect of noise to frequency measurements on the condition of lowSNR is studied, on the basis of multi-cycle synchronization frequency measurement, method of an multi-multi-cycle synchronization frequency measurement is put forward and the formula of frequency measurement & error calculation is deduced.At the end, the implementation method and calculationformula based on STM32 MCU are given.Experimentresult shows that for the low SNR sinusoidal signal, the method introduced can effectively suppress noise, and increases the accuracy of frequency measurement.

Key words： Metrology Frequency measurement Multi-multi-cycle synchronization frequency measurement Signal-noise-ratio Trigger error

作者简介: 谭超(1982-),湖北利川人,三峡大学讲师,主要研究方向为微弱信号检测。ctgutc@ctgu.edu.cn

引用本文:

谭超,邾玢鑫. 一种低信噪比正弦信号高精度频率测量方法[J]. 计量学报, 2015, 36(2): 212-215.
TAN Chao,ZHU Bin-xin. The High Precision Frequency Measurement Method for Low SNR Sinusoidal Signal. Acta Metrologica Sinica, 2015, 36(2): 212-215.

链接本文:

http://jlxb.china-csm.org:81/Jwk_jlxb/CN/10.3969/j.issn.1000-1158.2015.02.22 或 http://jlxb.china-csm.org:81/Jwk_jlxb/CN/Y2015/V36/I2/212