基于机器视觉的聚焦换能器焦点快速定位研究

doi:10.3969/j.issn.1000-1158.2022.10.11

摘要
图/表
参考文献(18)
相关文章 (15)

全文: PDF (46122 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要提出一种基于机器视觉的聚焦换能器焦点快速定位方法,结合聚焦换能器的几何中心即焦点的特性,基于边缘连接的快速椭圆检测算法检测换能器边缘轮廓信息,从而得到焦点位置,通过坐标间的转换关系来计算机械臂坐标系下的焦点坐标,实现机械臂对换能器焦点的快速定位。对焦平面进行声场扫描得到换能器的实际焦点坐标以验证该方法所得焦点坐标准确性。实验结果表明:该方法所定位焦点在-3dB实际焦点直径范围内定位准确。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	彭圆
	郑慧峰
	董照诚
	姚润广

关键词 ：计量学, 聚焦换能器, 焦点, 机器视觉, 快速定位, 椭圆检测

Abstract：A method of fast focus location of focused transducer based on machine vision is proposed. According to the feature of the focused transducers geometric center, the arc adjacency matrix-based fast ellipse detection connection algorithm detects the transducers edge contour information, and then gets the focus position, the focus coordinate of the manipulator is calculated by the coordinate transformation relation, and the focus of the transducer can be located quickly by the manipulator. The focus coordinates of the transducer are obtained by scanning the sound field of the focal plane to verify the accuracy of the focus coordinates obtained by the method. The experimental results show that the focus of the method is in the range of -3dB real focus diameter, which proves that the method is feasible.

Key words： metrology focused transducer focus machine vision quick fix;ellipse detection

收稿日期: 2021-06-23 发布日期: 2022-10-14

PACS:

TB95

基金资助:国家重点研发计划(2017YFF0205004);浙江省自然科学基金(LY17E050015、LQ20A040007);浙江省质量技术监督系统科研计划(20180103);浙江省‘仪器科学与技术’重中之重学科人才培育项目(JL150506);浙江省教育厅科研资助项目(Y201942513);浙江省大学生科研创新团队资助项目(2021R409052)

通讯作者: 郑慧峰(1981-),浙江衢州人,中国计量大学副教授,从事超声波自动化检测;声学计量测试技术研究。Email:zjufighter@163.com E-mail: zjufighter@cjlu.edu.cn

作者简介: 彭圆(1997-),四川泸州人,中国计量大学硕士研究生,研究方向为声学计量测试技术。Email:pengyuanT_P@163.com

引用本文:

彭圆,郑慧峰,董照诚,姚润广. 基于机器视觉的聚焦换能器焦点快速定位研究[J]. 计量学报, 2022, 43(10): 1313-1318.
PENG Yuan,ZHENG Hui-feng,DONG Zhao-cheng,YAO Run-guang. Research on Fast Focus Location of Focused Transducer Based on Machine Vision. Acta Metrologica Sinica, 2022, 43(10): 1313-1318.

链接本文:

http://jlxb.china-csm.org:81/Jwk_jlxb/CN/10.3969/j.issn.1000-1158.2022.10.11 或 http://jlxb.china-csm.org:81/Jwk_jlxb/CN/Y2022/V43/I10/1313

［1］於炜力, 曹永刚, 郑慧峰, 等. 声透镜聚焦相控阵换能器的波束特性研究［J］. 传感技术学报, 2019, 32(7): 991-995.
Yu W L, Cao Y G, Zheng H F, et al. Beam Characteristic Analysis of an Acoustic Lens-Focused Phased Array Transducer［J］. Journal of Transduction Technology, 2019, 32(7): 991-995.
［2］金鹏灿. 相控阵超声场建模及其自动化检测技术研究［D］. 杭州: 浙江大学, 2019.
［3］李荣基, 赵鹏, 王月兵, 等. 球壳换能器电声效率测量方法研究［J］. 计量学报, 2020, 41(12): 1521-1528.
Li R J, Zhao P, Wang Y B, et al. Research on Measurement Method of Electroacoustic Efficiency of Spherical Shell Transducer［J］. Acta Metrologica Sinica, 2020, 41(12): 1521-1528.
［4］徐遨璇, 曹永刚, 郑慧峰, 等. 基于反射探针的聚焦超声测量传感器设计和方法研究［J］. 计量学报, 2021, 42(2): 204-212.
Xu A X, Cao Y G, Zheng H F, et al. Design and Methodology Research of a Sensor Based on Reflection Probe for Focused Ultrasonic Measurement［J］. Acta Metrologica Sinica, 2021, 42(2): 204-212.
［5］姚启才, 汪地, 廖茂生. 基于机器视觉的机械臂智能抓取系统设计［J］. 计量与测试技术, 2020, 47(10): 28-33.
Yao Q C, Wang D, Liao M S. Intelligent Grasping System Design of Robot Arm Based on Machine Vision［J］. Metrology & Measurement Technique, 2020, 47(10): 28-33.
［6］Nguyen T M, Ahuja S, Wu Q M J. A real-time ellipse detection based on edge grouping［C］// IEEE International Conference on Systems, Man and Cybernetics. San Antonio, USA, 2009 : 3280-3286.
［7］Fitzgibbon A, Pilu M, FisherI R B. Direct least square fitting of ellipse［J］. IEEE Transactions on Pattern Analysis and Machine Intelligence, 1999, 21(5): 476-480.
［8］屈稳太. 基于弦中点Hough变换的椭圆检测方法［J］. 浙江大学学报(工学版), 2005, 39(8): 1132-1135.
Qu W T. Chord midpoint Hough transform based ellipse detection method［J］. Journal of Zhejiang University: Engineering Science, 2005, 39(8): 1132-1135.
［9］祝鸿宇, 曾令斌, 石世锋, 等. 工业机械臂多工位作业下的视觉对准技术研究［J］. 航空制造技术, 2020, 63(19): 56-65.
Zhu H Y, Zeng L B, Shi S F, et al. Research on Visual Alignment Technology of Industrial Robotic Arm in Multi-Station Operation［J］. Aviation manufacturing technology, 2020, 63(19): 56-65.
［10］郑启强. 基于视觉引导的工业机器人贴标系统研究［D］. 福州:福建工程学院, 2020.
［11］Meng C, Li Z X, Bai X Z, et al. Arc Adjacency Matrix-Based Fast Ellipse Detection ［J］. IEEE Transactions on Image Processing, 2020, 29(29): 4406-4420.
［12］Maire M, Arbelaez P, Fowlkes C, et al. Using contours to detect and localize junctions in natural images［C］// IEEE International Conference on Computer Vision & Pattern Recognition, Anchorage, USA, 2008, 29: 1-8.
［13］Akinlar C, Topal C. EDCircles: A real-time circle detector with a false detection control［J］. Pattern Recognition, 2013, 46(3): 725-740.
［14］Prasad D K, Chai Q, Leung M, et al. A parameter independent line fitting method［C］// IEEE International Conference on Computer Vision & Pattern Recognition. Providence, USA, 2012: 441-445.
［15］Prasad D K, Leung M K H, Cho S Y. Edge curvature and convexity based ellipse detection method［J］. Pattern Recognition, 2012, 45(9): 3204-3221.
［16］Prasad D K, Leung M K H, Quek C, et al. ElliFit: An unconstrained, non-iterative, least squares based geometric Ellipse Fitting method［J］. Pattern Recognition, 2013, 46(5): 1449-1465.
［17］Prasad D K, Leung M K H, Quek C, et al. DEB: definite error bounded tangent estimator for digital curves. ［J］. IEEE Transactions on Image Processing, 2014, 23(10): 4297-4310.
［18］刘海楠, 赵鹏, 叶晓同, 等. 基于近场声全息的聚焦换能器声场测量方法研究［J］. 计量学报, 2021, 42(6): 780-784.
Liu H N, Zhao P, Ye X T, et al. Research on Sound Field Measurement Method of Focusing Transducer Based on Near-field Acoustic Holography［J］. Acta Metrologica Sinica, 2021, 42(6): 780-784.