Abstract:By analyzing and studying the traditional calibration methods of accelerometer rectification error, the calibration scheme of accelerometer rectification error based on centrifugal-vibration composite acceleration input is proposed. The calibration method of accelerometer rectification error under the combined effect of constant acceleration and vibration acceleration is given by establishing the nonlinear coupling model of accelerometer. The rectification error experiment of accelerometer under the combined effect of constant acceleration and vibration acceleration is carried out by using the developed centrifugal-vibration composite calibration device, and the experimental result verifies that the calibration method of accelerometer rectification error based on the combined input of constant acceleration and vibration acceleration is reasonable and feasible.
[1]IEEE 528—2019 Standard for Inertial Sensor Terminology[S]. 2019.
[2]IEEE Std 647—2006 IEEE Standard Specification Format Guide and Test Procedure for Linear Accelerometers[S]. 2008.
[3]沈润杰, 何闻, 陈子辰. 高线加速度下电动振动台机电耦合特性的研究[J]. 振动工程学报, 2001, 14(4): 429-432.
Shen R J, He W, Chen Z C. Research on electromechanical coupling characteristics of electric shaking table under high linear acceleration[J]. Journal of vibration engineering, 2001, 14(4): 429-432.
[4]沈润杰, 何闻, 梅德庆, 等. 离心力场下电动振动台及动圈纠偏系统动特性的研究[J]. 浙江大学学报(工学版), 2002, 36(1): 92-99.
Shen R J, He W, Mei D Q, et al. Study on dynamic characteristics of electrodynamic shaking table and moving coil rectifying system under centrifugal force field[J]. Journal of Zhejiang University (Engineering Edition), 2002, 36(1): 95-99.
[5]Guan W, Dong X M, Long Z H. Accelerometer Transverse Sensitivity Testing with Double Turntable Centrifuge[C]//2014 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings. Montevideo, Uruguay, 2014: 578-582.
[6]Guan W, Dong X M, Dong X M. Calibration of Accelerometer with Multicomponent Inputs[C]// 2014 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings. Montevideo, Uruguay, 2014: 16-19.
[7]Guan W, Dong X M, Long Z H, et al. Evaluation of the accelerometer rectification error by using a double centrifuge[C]//Proc of 2014 21st Saint Petersburg International Conference on Integrated Navigation Systems. Saint Petersburg, Russia, 2014: 323-327.
[8]Jepsen R A, Romero E F. Testing in a Combined Vibration and Acceleration Enviroment[R]. SAND2005-0386C, Orlando, Florida, 2005.
[9]Actidyn Systems, V67 Technical Description[EB]. [2020-01-18]. http://www.actidyn.com/wp-content/uploads/2010/06/v67.pdf.
[10]Dong X M, Guan W, Meng X F. Combined Accelerations Produced by Vibrafuge[J]. Applied Mechanics & Materials, 2014, 543-547:971-974.
[11]董雪明, 熊磊, 关伟, 等. 基于离心-振动复合系统的加速度模型[J]. 测试技术学报, 2014, 28(3):214-218.
Dong X M, Xiong L, Guan W, et al. Analysis of the Combined Acceleration Model Reproduced by Centrifuge-Vibrator System[J]. Journal of measurement technology, 2014, 28(3):214-218.
[12]董雪明, 关伟, 何懿才, 等. 基于条件数理论的加速度计校准方案优化[J]. 计量技术, 2014(5): 50-52.
[13]Sun C, Ren S Q, Wang C H. Revised error calibration model of linear accelerometer on precision centrifuge[J]. Review of Scientific Instruments, 2019, 90(8):085002.
[14]Ardia P, Giordano D, Schmidt M W. A model for the viscosity of rhyolite as a function of H2O-content and pressure: A calibration based on centrifuge piston cylinder experiments[J]. Geochimica Et Cosmochimica Acta, 2008, 72(24): 6103-6123.
[15]Yang D, Naesgaard E, Byrne P M, et al. Numerical model verification and calibration of George Massey Tunnel using centrifuge models[J]. Canadian Geotechnical Journal, 2004, 41(5): 921-942.
[16]Mason B, Bray J D, Kutter B L, et al. Earthquake motion selection and calibration for use in a geotechnical centrifuge[C]//Seventh International Conference of Physical Modelling in Geotechnics. 2010.