2025年04月07日 星期一 首页   |    期刊介绍   |    编 委 会   |    投稿指南   |    期刊订阅   |    统合信息   |    联系我们
计量学报  2022, Vol. 43 Issue (7): 844-850    DOI: 10.3969/j.issn.1000-1158.2022.07.02
  几何量计量 本期目录 | 过刊浏览 | 高级检索 |
表面粗糙度国际比对自动测量系统关键技术研究
卜祥鹏1,张树1,2,皮磊1,施玉书1
1.中国计量科学研究院,北京 100029
2.深圳中国计量科学研究院技术创新研究院,广东 深圳 518132
Research on the Key Technology of the Automatic Measurement System for Surface Roughness International Comparison
BU Xiang-peng1,ZHANG Shu1,2,PI Lei1,SHI Yu-shu1
1. National Institute of Metrology, Beijing 100029, China
2. Shenzhen Institute of TechnologyInnovation, NIM, Shenzhen, Guangdong 518132, China
全文: PDF (2281 KB)   HTML (1 KB) 
输出: BibTeX | EndNote (RIS)      
摘要 基于中国计量科学研究院的表面粗糙度基准计量装置,开展了视觉定位系统、自动操作系统和多自由度位移系统的研究,从而实现依据国际比对协议规定流程的自动化测量。实验验证表明:该系统可有效实现表面粗糙度的自动化测量,满足国际比对的要求。在对国际比对规定的表面粗糙度标准器的测量实验中,该系统的自动定位测量的重复性为4.2nm,相比于手动定位测量提高了2.6倍,有效地减少了测量过程中引入的人为误差。
服务
把本文推荐给朋友
加入我的书架
加入引用管理器
E-mail Alert
RSS
作者相关文章
卜祥鹏
张树
皮磊
施玉书
关键词 计量学表面粗糙度国际比对自动测量视觉定位测量重复性    
Abstract:Based on the surface roughness measurement device of NIM, researches on the visual positioning system, automatic operating system and multi-degree-of-freedom displacement system have been carried out, so as to realize the automatic measurement in accordance with the procedures specified in the international comparison agreement.Through experimental verification, the system can effectively realize the automatic measurement of surface roughness and meet the requirements of international comparison.In the measurement experiment on the surface roughness standard specified by the international comparison, the repeatability of the automatic positioning measurement of the system is 4.2nm, which is 2.6 times higher than the manual positioning measurement, and can effectively reduce the introduction of human error in the measurement process.
Key wordsmetrology    surface roughness    international comparison    automatic measurement    visual positioning;measurement repeatability
收稿日期: 2021-03-10      发布日期: 2022-07-18
PACS:  TB92  
基金资助:中国计量科学研究院质量技术基础能力建设(ANL2003);中国计量科学研究院基本科研业务费(AKY1605)
通讯作者: 施玉书(1982-),山西太原人,中国计量科学研究院前沿计量科学中心副研究员,博士,主要从事微纳计量技术、精密仪器测量研究。Email:shiys@nim.ac.cn     E-mail: shiys@nim.ac.cn
作者简介: 卜祥鹏(1995-),辽宁营口人,中国计量科学研究院硕士研究生,研究方向为微纳计量仪器。Email:xiangpeng.bu@foxmail.com
引用本文:   
卜祥鹏,张树,皮磊,施玉书. 表面粗糙度国际比对自动测量系统关键技术研究[J]. 计量学报, 2022, 43(7): 844-850.
BU Xiang-peng,ZHANG Shu,PI Lei,SHI Yu-shu. Research on the Key Technology of the Automatic Measurement System for Surface Roughness International Comparison. Acta Metrologica Sinica, 2022, 43(7): 844-850.
链接本文:  
http://jlxb.china-csm.org:81/Jwk_jlxb/CN/10.3969/j.issn.1000-1158.2022.07.02     或     http://jlxb.china-csm.org:81/Jwk_jlxb/CN/Y2022/V43/I7/844
京ICP备:14006989号-1
版权所有 © 《计量学报》编辑部
地址:北三环东路18号(北京1413信箱)  邮编:100029 电话:(010)64271480
本系统由北京玛格泰克科技发展有限公司设计开发  技术支持:support@magtech.com.cn