2025年05月12日 星期一 首页   |    期刊介绍   |    编 委 会   |    投稿指南   |    期刊订阅   |    统合信息   |    联系我们
计量学报  2022, Vol. 43 Issue (1): 77-84    DOI: 10.3969/j.issn.1000-1158.2022.01.12
  力学计量 本期目录 | 过刊浏览 | 高级检索 |
基于EEMD和低秩稀疏分解的超声缺陷回波检测方法
周航锐1, 孙坚1, 徐红伟1, 缪存坚2, 宋鑫2
1. 中国计量大学 机电工程学院,浙江 杭州 310018
2. 浙江省特种设备检验研究院,浙江 杭州 310012
Ultrasonic Defect Echoes Identification Based on EEMD and Low-Rank Sparse Decomposition
ZHOU Hang-rui1, SUN Jian1, XU Hong-wei1, MIAO Cun-jian2, SONG Xin2
1. College of Mechanical and Electrical Engineering, China Jiliang University, Hangzhou, Zhejiang 310018, China
2. Zhejiang Provincial Special Equipment Inspection And Research Institute, Hangzhou, Zhejiang 310012, China
全文: PDF (3763 KB)   HTML (1 KB) 
输出: BibTeX | EndNote (RIS)      
摘要 针对应用超声对金属材料微小缺陷检测时缺陷回波容易被噪声干扰的问题,提出了一种基于集合经验模态分解(EEMD)和低秩稀疏分解相结合的检测方法,以避免传统基于经验模态分解(EMD)的去噪方法难以消除结构噪声的问题。首先对缺陷检测信号进行EEMD得到一系列本征模态函数(IMF),采用基于概率密度函数的相似性测量方法选取相关模态,同时舍弃非相关模态以实现初步降噪;然后基于短时傅里叶变换(STFT)计算相关模态重构信号的幅度谱,执行低秩稀疏分解算法提取幅度谱中的稀疏成份实现进一步降噪;最后对稀疏成份进行逆STFT得到纯净的缺陷回波信号。分别对仿真和实测信号进行处理,结果表明该方法在缺陷回波检测方面是有效的。
服务
把本文推荐给朋友
加入我的书架
加入引用管理器
E-mail Alert
RSS
作者相关文章
周航锐
孙坚
徐红伟
缪存坚
宋鑫
关键词 计量学超声检测金属缺陷集合经验模态分解低秩稀疏分解    
Abstract:In order to detect the minor defect echoes of metal materials from noisy signal in ultrasonic nondestructive testing, a ultrasonic defect echoes identification method based on ensemble empirical mode decomposition (EEMD) and low-rank sparse decomposition was proposed. First, the EEMD was performed on the defect detection signal to obtain a series of intrinsic mode functions (IMF). The similarity measurement method based on probability density function was used to select irrelevant IMFs and these IMFs were discarded to achieve preliminary noise reduction. Then a denoising method based on short-time Fourier transform (STFT) and low-rank sparse decomposition algorithm was used for further noise suppression of the reconstructed signal. Finally, the inverse STFT was performed to obtain denoised defect echo signal in time domain. The simulated and measured signals are processed separately, and the results show that the method is effective in defect echo detection.
Key wordsmetrology    ultrasonic NDT    metallic defect;EEMD;low-rank sparse decomposition
收稿日期: 2020-08-23      发布日期: 2022-01-06
PACS:  TB95  
基金资助:浙江省质量技术监督系统科研计划(20160122)
通讯作者: 孙坚1964-), 男, 浙江杭州人, 中国计量大学教授, 研究方向为在线检测、计量测试与机器视觉。Email: sunjian@cjlu.edu.cn     E-mail: sunjian@cjlu.edu.cn
作者简介: 周航锐1996-),吉林四平人,中国计量大学硕士研究生,研究方向为在线检测、信号处理。Email:S1801081129@cjlu.edu.cn
引用本文:   
周航锐, 孙坚, 徐红伟, 缪存坚, 宋鑫. 基于EEMD和低秩稀疏分解的超声缺陷回波检测方法[J]. 计量学报, 2022, 43(1): 77-84.
ZHOU Hang-rui, SUN Jian, XU Hong-wei, MIAO Cun-jian, SONG Xin. Ultrasonic Defect Echoes Identification Based on EEMD and Low-Rank Sparse Decomposition. Acta Metrologica Sinica, 2022, 43(1): 77-84.
链接本文:  
http://jlxb.china-csm.org:81/Jwk_jlxb/CN/10.3969/j.issn.1000-1158.2022.01.12     或     http://jlxb.china-csm.org:81/Jwk_jlxb/CN/Y2022/V43/I1/77
京ICP备:14006989号-1
版权所有 © 《计量学报》编辑部
地址:北三环东路18号(北京1413信箱)  邮编:100029 电话:(010)64271480
本系统由北京玛格泰克科技发展有限公司设计开发  技术支持:support@magtech.com.cn