基于立式旋转平衡系统的惯性积测试方法研究

doi:10.3969/j.issn.1000-1158.2020.Z1.23

摘要
图/表
参考文献(8)
相关文章 (15)

全文: PDF (563 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要针对现有测量飞行物体惯性积方法精度不高的问题,提出一种基于立式旋转平衡测量技术测量计算惯性积的方法。构建了一种旋转平衡测量转台,介绍了数据的测取与计算处理方法,进行了误差分析,结合实际的工程应用,选取标准工件进行多次测量,得出了满意的结果。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	张磊乐
	武艺泳
	时永华

关键词 ：计量学, 立式旋转平衡, 惯性积

Abstract：In view of the shortcomings of the existing methods for measuring the product of inertia of flying objects, a method for calculating the product of inertia based on the vertical rotating balance measurement technology is proposed. A rotary balance measurement turntable is constructed, the data acquisition and calculation processing method are introduced, error analysis is carried out. Combined with the actual engineering application, the standard workpiece is selected for multiple measurements, and the satisfactory results are obtained.

Key words： metrology vertical rotating balance product of inertia

PACS:

TB936

作者简介: 张磊乐(1979-),男,河南漯河人,郑州机械研究所有限公司高级工程师,硕士研究生导师,研究方向为非标设备的力学分析与优化创新。Email:99336093@qq.com

引用本文:

张磊乐,武艺泳,时永华. 基于立式旋转平衡系统的惯性积测试方法研究[J]. 计量学报, 2020, 41(12A): 124-128.
ZHANG Lei-le,WU Yi-yong,SHI Yong-hua. Reaserch on the Method of Measuring Inertial Product Based on Vertical Rotating Balance System. Acta Metrologica Sinica, 2020, 41(12A): 124-128.

链接本文:

http://jlxb.china-csm.org:81/Jwk_jlxb/CN/10.3969/j.issn.1000-1158.2020.Z1.23 或 http://jlxb.china-csm.org:81/Jwk_jlxb/CN/Y2020/V41/I12A/124

［1］边志强, 唐振刚, 栗双岭, 等. 航天器转动惯量和惯性积的集成一体化测试方法［J］. 航天制造技术, 2017, 206(6): 19-23.
Bian Z Q, Tang Z G, Li S L, et al. Research on Integration Testing Method on Rotational Inertia and Product of Inertia for Spacecraft［J］. Aerospace Manufacturing Technology, 2017, 206(6): 19-23.
［2］吴斌, 赵育善、马彩霞. 用扭摆测试导弹惯性积的方法［J］. 上海航天, 2000(2): 42-44.
Wu B, Zhao Y S, Ma C X. Method for Testing Missiles Product of Inertia Using Torsion Pendulum［J］. Aerospace ShangHai, 2000(2): 42-44.
［3］卢志辉, 薄悦, 张磊乐, 等. 一种新型的质心测量机构与测量方法［J］. 计量学报, 2010, 31(2): 119-122.
Lu Z H, Bo Y, Zhang L L, et al. A new barycenter measuring appliance and measuring method［J］. Acta Metrologica Sinica, 2010, 31(2): 119-122.
［4］薄悦. 提高质心测量灵敏度的关键技术研究［D］. 郑州: 郑州机械研究所, 2002.
［5］刘建营. 固体火箭发动机质心测量技术评述［J］. 固体火箭技术, 1991(4): 75-86.
Liu J Y. Review on the measurement technology of solid rocket motors center of mass［J］. Journal of Solid Rocket Technology, 1991(4): 75-86.
［6］卢志辉, 孙志扬, 陈惠南, 等. 旋转体质心、形心和质心横偏量的测量机构设计及精度分析［J］. 机械设计, 2001(4): 25-27.
Lu Z H, Sun Z Y, Chen H N, et al. Design and Accuracy Analysis of Measuring Mechanism for Centroid and Transverse Deviation of Centroid of Rotating Body［J］. Journal of Maching Design, 2001(4): 25-27.
［7］王秋晓, 王迎. 飞行器质量特性参数测量［J］. 重庆大学学报, 2011, 34(12): 23-28.
Wang Q X, Wang Y. A new measurement method for mass property parameters［J］. Journal of Chongqing University, 2011, 34(12): 23-28.
［7］费业泰. 误差理论与数据处理［M］. 5版. 北京: 机械工业出版社, 2000.
［8］满益明, 吴俊辉, 康军, 等. 空天飞行器质量特性设计方法研究［J］. 航天器工程, 2018, 27(4): 22-27.
Man Y M, Wu J H, Kang J, et al. Research on design method of mass property for aerospace vehicle［J］. Spacecraft Engineering, 2018, 27(4): 22-27.