基于机器视觉的航空铆钉尺寸检测技术

邢雪亮; 甘文波; 蒋朝根

doi:10.3969/j.issn.1000-1158.2020.05.02

PDF(1350 KB)

计量学报 ›› 2020, Vol. 41 ›› Issue (5) : 518-523. DOI: 10.3969/j.issn.1000-1158.2020.05.02

几何量计量

基于机器视觉的航空铆钉尺寸检测技术

邢雪亮,甘文波,蒋朝根

作者信息 +

Technology of Size Detection of Air Rivets Based on Machine Vision

XING Xue-liang,GAN Wen-bo,JIANG Chao-gen

Author information +

文章历史 +

摘要

航空铆钉的尺寸偏差会增加航空事故发生的可能性。为了实现航空铆钉尺寸检测的高精度与智能化,提出一种基于机器视觉的航空铆钉尺寸检测方法。通过边缘检测算法对铆钉进行自动识别与检测,可减少航空铆钉尺寸的误差。基于航空铆钉产品规范,分析得出各项尺寸参数要求与事件流程,使用OpenCV作为开发平台,采用阈值分割算法与分水岭算法进行图像分割;同时,通过平滑处理、形态学、轮廓提取算法完成图像处理。实测结果表明,在±0.005mm精度下,铆钉尺寸检测结果与实际值的吻合度达到90%以上。

Abstract

The size error of air rivets can increase the possibility of aviation accidents. To enhancing the precision and intelligence of size detection for air rivets, a kind of method based on machine vision was used. The size error of air rivets can be eliminated by the automatic identification and detection of rivets depending on the edge detection algorithm. Based on the production standards of air rivets, the requirements of various dimensional parameters and the processes of the events were obtained. Using OpenCV as the development platform, the image segmentation was finished by the threshold segmentation algorithm and watershed algorithm. Meanwhile, the image processing was completed by smoothing, morphology and contour extraction algorithm. The test results showed that the accurateness of the size results with the actual value was more than 90% under the accuracy of ±0.005mm.

导出引用

邢雪亮,甘文波,蒋朝根. 基于机器视觉的航空铆钉尺寸检测技术[J]. 计量学报. 2020, 41(5): 518-523 https://doi.org/10.3969/j.issn.1000-1158.2020.05.02

XING Xue-liang,GAN Wen-bo,JIANG Chao-gen. Technology of Size Detection of Air Rivets Based on Machine Vision[J]. Acta Metrologica Sinica. 2020, 41(5): 518-523 https://doi.org/10.3969/j.issn.1000-1158.2020.05.02

中图分类号： TB921

参考文献

［1］丁力平. 一种航空铆钉自动检测系统研制［J］. 航空制造技术, 2017,(21): 50-55.
Ding L P.Development of an Automatic Detection System for Aeronautic Rivets［J］. Aeronautical Manufacturing Technology, 2017,(21): 50-55.
［2］王耀南, 陈铁健, 贺振东, 等. 智能制造装备视觉检测控制方法综述［J］. 控制理论与应用, 2015, 32(3): 273-286.
Wang Y N, Chen T J, He Z D, et al. Review on the machine vision measurement and control technology for intelligent manufacturing equipment［J］. Control Theory & Applications, 2015, 32(3): 273-286.
［3］王海涛. 航空责任事故与刑法上的信赖原则法理—以日航123航班空难事故为例的分析［J］. 北京航空航天大学学报(社会科学版), 2016, 29(1): 42-46.
Wang H T. Aviation Accident and Principle of Reliance in Criminal Law: A Case Study of the Air Crash of JAL Flight 123［J］. Journal of Beijing University of Aeronautics and Astronautics(Social Sciences Edition), 2016, 29 (1): 42-46.
［4］CN-HB 7773—2005 基于UG建模通用要求［S］.
［5］赵宇, 许瑛, 郭泉, 等. 实心铆钉铆接变形检测系统的设计与实现［J］. 制造业自动化, 2011, 33(7): 34-37.
Zhao Y, Xu Y, Guo Q, et al.The design and implementation of solid rivets riveting deformation detection system ［J］. Manufacturing Automation, 2011, 33(7): 34- 37.
［6］吴荥荥. 基于机器视觉的零部件质量检测研究［D］. 镇江:江苏大学, 2017.
［7］胡江涛, 张俊涛, 汤伟. 基于畸变补偿的飞机铆钉尺寸测量方法研究［J］. 陕西科技大学学报(自然科学版), 2016, 34(4): 177-181.
Hu J T, Zhang J T, Tang W. Research on measurement method of aircraft rivet dimension based on distortion compensation［J］. Journal of Shanxi University of Science & Technology (Natural Science Edition), 2016, 34 (4): 177-181.
［8］石韵昭, 倪军, 李宁钏, 等. 基于机器视觉的双工位载带检测系统研究［J］. 计量学报, 2019, 40(2): 196-200.
Shi Y Z, Ni J, Li N C, et al. Research on Duplex Carrier Detection System Based on Machine Vision［J］. Acta Metrologica Sinica, 2019, 40(2): 196-200.
［9］王艳, 谢广苏, 沈晓宇. 一种基于MSER和SWT的新型车牌检测识别方法研究［J］. 计量学报, 2019, 40(1): 82-90.
Wang Y, Xie G S, Shen X Y. A New Vehicle Licence Plate Recognition Method Based on MSER and SWT［J］. Acta Metrologica Sinica, 2019, 40 (1) : 82-90.
［10］邱东岳, 吉喆, 朱腾飞, 等. 基于方差和显著性特征的超声图像分割方法研究［J］. 计量学报, 2018, 39(5): 712-715.
Qiu D Y, Ji Z, Zhu T F, et al. Ultrasonic Image Segmentation Based on Variance and Saliency Features［J］. Acta Metrologica Sinica, 2018, 39(5): 712-715.
［11］朱丹丹, 王斌, 杨奕, 等. Contourlet变换和遗传算法相结合的沥青红外图像增强方法［J］. 计量学报, 2019, 40(1): 25-30.
Zhu D D, Wang B, Yang Y, et al. Asphalt Infrared Image Enhancement of Combining Contourlet Transform with Genetic Algorithm［J］. Acta Metrologica Sinica, 2019, 40(1): 25-30.
［12］钱礼闰. CCD机器视觉在精密机械部件外观缺陷检测中的系统结构研究及应用［J］. 教育教学论坛, 2018,(14): 105-106.
［13］高丽, 杨树元, 李海强. 一种基于标记的分水岭图像分割新算法［J］. 中国图象图形学报, 2007,12(6): 1025-1032.
Gao L, Yang S Y, Li H Q. New Unsupervised Image Segmentation via Marker-Based Watershed［J］. Journal of Image and Graphics,2007,12(6): 1025-1032.
［14］Canny J. A computational approach to edge detection［J］. IEEE Transactions on Pattern Analysis and Machine Intelligence, 1986, 8(6): 679-698.
［15］张斌, 贺赛先. 基于Canny算子的边缘提取改善方法［J］. 红外技术, 2006,28(3): 165-169.
Zhang B, He S X. Improved Edge-Detection Method Based On Canny Algorithm［J］. Infrared Technology, 2006,28(3): 165-169.
［16］祝振敏, 曲兴华, 梁海昱, 等. 基于发光二极管环形阵列与漫反射表面的均匀照明光源研究［J］. 光学学报, 2011, 31(1): 186-191.
Zhu Z M, Qu X H, Liang H Y, et al. Uniform Illumination Study by Light-Emitting Diode Ring Array and Diffuse Reflection Surface［J］. Acta Optica Sinica, 2011, 31(1): 186-191.
［17］齐辉. 工件尺寸与缺陷自动检测控制系统设计与实现［D］. 成都:西南交通大学, 2017.
［18］王红宇, 游敏娟, 李琪, 等. 一种中值滤波图像去噪的改进算法［J］. 中国科技信息, 2019,(1): 84-85.
［19］赵雪松, 陈淑珍. 综合全局二值化与边缘检测的图像分割方法［J］. 计算机辅助设计与图形学学报, 2001,13(2): 118-121.
Zhao X S, Chen S Z. Image Segmentation Based on Global Binarization and Edge Detection［J］. Journal of Computer Aided Design & Computer Graphics, 2001,13(2): 118-121.
［20］熊立志, 陈立潮, 潘理虎, 等. 基于多尺度轮廓结构元素的多形状边缘检测［J］. 计算机应用研究, 2012, 29(9): 3497-3500.
Xiong L Z, Chen L C, Pan L H, et al. Morphologic edge detection based on multi-scale contour structuring elements with multiple structuring elements［J］. Application Research of Computers, 2012, 29(9): 3497-3500.
［21］Victor O R, Juan I G L, Nicolas S L, et al. An Improved Watershed Algorithm Based on Efficient Computation of Shortest Paths［J］. Pattern Recognition, 2007, 40: 1078-1090.
［22］周正杰, 王润生. 基于轮廓的形状特征提取与识别方法［J］. 计算机工程与应用, 2006,42(14): 92-94.
Zhou Z J, Wang R S. A Contour-Based Method of Feature Extraction and Shape Recognition［J］. Computer Engineering and Applications ,2006,42(14):92-94.
［23］胡事民, 杨永亮, 来煜坤. 数字几何处理研究进展［J］. 计算机学报, 2009, 32(8): 1451- 1469.
Hu S M, Yang Y L, Lai Y K. Research Progress of Digital Geometry Processing［J］. Chinese Journal of Computers, 2009, 32(8): 1451-1469.
［24］王植, 贺赛先. 一种基于Canny理论的自适应边缘检测方法［J］. 中国图象图形学报, 2004,9(8):65-70.
Wang Z, He S X. An Adaptive Edge-detection Method Based on Canny Algorithm［J］. Journal of Image and Graphics, 2004,9(8):65-70.