2025年04月09日 星期三 首页   |    期刊介绍   |    编 委 会   |    投稿指南   |    期刊订阅   |    统合信息   |    联系我们
计量学报  2020, Vol. 41 Issue (6): 696-703    DOI: 10.3969/j.issn.1000-1158.2020.06.11
  力学计量 本期目录 | 过刊浏览 | 高级检索 |
利用微米划痕研究TiN涂层的失效机理
刘明,李烁,高诚辉
福州大学 机械工程及自动化学院, 福建 福州 350116
Study of Failure Mechanism of TiN Coatings by Micro-scratch Testing
LIU Ming,LI Shuo,GAO Cheng-hui
School of Mechanical Engineering and Automation, Fuzhou University, Fuzhou, Fujian 350116, China
全文: PDF (1771 KB)   HTML (1 KB) 
输出: BibTeX | EndNote (RIS)      
摘要 利用微米划痕仪和扫描电子显微镜,研究了TiN涂层的失效过程,分析了摩擦系数波动的机理,并评估了涂层的断裂韧性。结果表明:低载荷阶段,TiN涂层发生剪切滑移,划痕轨迹边缘出现了由反向V形裂纹到平行裂纹,再到正向V形裂纹的裂纹形式转变;随着法向载荷的增大,TiN涂层发生阶梯式剥落。摩擦系数的波动主要由于表面形貌和涂层失效的影响,不同的加载方式,摩擦系数有一定差别。采用微米划痕可以较准确地测试TiN涂层的断裂韧性,与压痕断裂法和有限元模拟法的测试结果相吻合。
服务
把本文推荐给朋友
加入我的书架
加入引用管理器
E-mail Alert
RSS
作者相关文章
刘明
李烁
高诚辉
关键词 计量学摩擦系数TiN涂层失效机理微米划痕断裂韧性    
Abstract:The failure process of TiN coating was studied by micro-scratch and scanning electron microscope, the mechanism of friction coefficient fluctuation was analyzed and the fracture toughness of the coating was evaluated. The results show that at low load stage, the TiN coating undergoes shear slip, and the edge of the scratch track appears from the reverse V-shaped crack to the parallel crack, and then to the forward V-shaped crack; as the normal load increases, the TiN coating undergoes stepwise spalling. Fluctuations in the coefficient of friction are mainly due to surface topography and coating failure, different loading methods have different friction coefficients. The fracture toughness of the TiN coating can be tested accurately with micro-scratches, which is consistent with the test results of the indentation fracture method and the finite element simulation method.
Key wordsmetrology    friction coefficient    TiN coating    failure mechanism    micro-scratch    fracture toughness
收稿日期: 2018-09-03      发布日期: 2020-06-08
PACS:  TB93  
基金资助:国家自然科学基金(51705082,51875106); CAD/CAM福建省高校工程研究中心基金资助(K201705); 福州大学贵重仪器设备开放测试基金资助(2018T017)
作者简介: 刘明(1985-), 男, 黑龙江哈尔滨人, 福州大学教授, 福建省闽江学者特聘教授, 博士生导师, 主要从事微纳米接触力学和摩擦学方面研究。Email: mingliu@fzu.edu.cn
引用本文:   
刘明,李烁,高诚辉. 利用微米划痕研究TiN涂层的失效机理[J]. 计量学报, 2020, 41(6): 696-703.
LIU Ming,LI Shuo,GAO Cheng-hui. Study of Failure Mechanism of TiN Coatings by Micro-scratch Testing. Acta Metrologica Sinica, 2020, 41(6): 696-703.
链接本文:  
http://jlxb.china-csm.org:81/Jwk_jlxb/CN/10.3969/j.issn.1000-1158.2020.06.11     或     http://jlxb.china-csm.org:81/Jwk_jlxb/CN/Y2020/V41/I6/696
京ICP备:14006989号-1
版权所有 © 《计量学报》编辑部
地址:北三环东路18号(北京1413信箱)  邮编:100029 电话:(010)64271480
本系统由北京玛格泰克科技发展有限公司设计开发  技术支持:support@magtech.com.cn