Abstract:To solve lacking of device which can cover the EVM range of digital signals in the intermediate checks of calibration equipment of digital signal generator and signal analyzer, an analytical relation between SNR and EVM was derived. A system based on noise generator and digital signal generator was proposed which can generate digtal modulation signals with any EVM value. To verify the repeatability and stability of the output of the system, experiments were performed, BPSK and 64QAM signals were tested, and results showed that even though the values between the theory and the measured were not the same, the output of the sytem was very stable, the repeatability and stability of the output qualified with needs of the intermediate checks of calibration equipment of digital signal generator and signal analyzer.
[1]李皓, 杨栋, 李曙光. 期间核查的确立与实施[J]. 计量与测试技术, 2016, 43(4): 107-108.
Li H, Yang D, Li S G. During the Verification Estabilishment and Implementation[J]. Metrology & Measurement Technique, 2016, 43(4): 107-108.
[2]方宏, 卞昕, 何昭, 等. 基于星座图设计的矢量调制误差计量方法研究[J]. 仪器仪表学报, 2013, 36(1): 128-132.
Fang H, Bian X, He Z, et al. Study on traceable measurement method of vector modulation errors based on constellation diagram design[J]. Chinese Journal of Scientific Instrument, 2013, 36(1): 128-132.
[3]范巧成,郑磊,姜荣华 . 一种准确可靠的期间核查方法[J]. 计量学报, 2015, 36(6): 662-665.
Fan Q C, Zheng L, Jiang R H. One Way of Accuracy and Reliable Method for Intermediate Checks[J]. Acta Metrologica Sinica, 2015, 36(6): 662-665.
[4]谭建灵. 期间核查在检测和校准机构中的应用[J]. 计量与测试技术, 2012, 39(4): 1-3.
Tan J L. Application of Intermediate Checks in Testing and Calibration Institutions[J]. Metrology & Measurement Technique, 2012, 39(4): 1-3.
[5]谭晓衡, 李腾蛟, 李玉闩, 等. 数字发射机的误差矢量幅度仿真与分析[J]. 四川大学学报, 2009, 41(9): 211-216.
Tan X H, Li T J, Li Y S, et al. Simulation and Analysis of the Digital Transmitter EVM[J]. Journal of Sichuan University, 2009, 41(9): 211-216.
[6]余清华, 沈小青, 陈思, 等. 数字通信基带设备的误码率估计方法[J]. 计量学报, 2017, 38(2): 230-233.
Yu Q H, Shen X Q, Chen S, et al. The Method of BER Estimation on Digital Communication Baseband Equipment[J]. Acta Metrologica Sinica, 2017, 38(2): 230-233.
[7]Shafik R A, RahmanM S, Is lam A R. On the extended relationships among EVM, BER and SNR as performance metrics[J]. Electrical and Computer Engineering. 2006, 10(6): 408-411.
[8]王希东, 孔路平. 数字调制参数校准仿真研究[J]. 电子测量与仪器学报, 2009, 23(8) : 7-13.
Wang X D, Kong L P. Simulation study on calibration of digital modulation parameters[J]. Journal of Sichuan University, 2009, 23(8) : 7-13.
[9]Zhang R, Zhou F, Guo L Q, et al. Metrology of vector modulation error: problems and solution [C]//27th Conference on Precision Electromagnetic Measurement, Daejeon, Korean, 2010: 718-719.
[10]Fang H, Bian X, Zhou X, et al. The numerical simulation and experiment research for measurement of error vector magnitude (EVM) [J]. Applied Mechanics and Materials, 2011, 24(103): 199-204.
[11]Forestier S, Bouysse P, Quere R, et al. Joint optimization of the power-aided efficiency and error vector measurement of 20-GHz pHEMT amplifier through a new dynamic biascontrol method [J]. IEEE Transactions on Microwave Theory and Techniques, 2004, 52(4): 1132–1140.
[12]Ghairabeh K M, Gard K G, Steer M B. Accurate Estimation of Digital Communication System Metrices—SNR, EVM and in a Nonlinear Amplifier Environment [C]// IEEE. 64th ARFTG Microwave Measurements Conference. Orlando, FL, USA, 2004: 734–739.
[13]Vauhkonen M, Vadasz D, Kaipio J P. Tikhonov regularization and prior information in electrical impedance tomography [J]. IEEE Trans Med Imaging, 1998, 17(2): 285-293.
[14]McKinley M D, Remley K A, Mylinski M, et al. EVM Calculation for Broadband Modulated Signals [C]//IEEE.64th ARFTG Microwave Measurements Conference. Orlando, FL, USA, 2004: 45-52.
[15]Peters R, Lebbink E K, Lee V, et al. Applying EVM to Satellite on Ground and In-Orbit Testing-Better Data in Less Time[R]. American Institute of Aeronautics and Astronautics, 2019.
[16]Wett W T, Hanzo I, Steel R. Band with efficient QAM schemes for Rayleigh fading channels [J]. Communications Speech and vision, IEE Proc Part I, 1991, 138(3): 168-175.