基于CT图像的金属点阵结构内部缺陷检测方法

doi:10.3969/j.issn.1000-1158.2020.05.06

摘要
图/表
参考文献(20)
相关文章 (15)

全文: PDF (1609 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要基于计算机断层扫描(CT)图像的灰度值分布特征,提出了一种金属三维多层点阵结构内部缺陷的检测方法。通过3个横向相邻固定尺寸像素点集合灰度值总和之间的差值分布来判别缺陷的存在,理论分析给出了相应的判别标准和依据。实验验证结果表明:与人工标记的方法进行对比,该算法对金属三维多层点阵结构样件的内部典型断层缺陷的识别率达到98.5%。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	张玉燕
	李永保
	温银堂
	张芝威

关键词 ：计量学, 金属点阵结构, CT扫描图像, 缺陷检测, 灰度值总和, 增材制造

Abstract：Based on the gray value distribution characteristics of computed tomography (CT)scanning images, a method for detecting the internal defects of metal three-dimensional multi-layer lattice structures was proposed. The defects was detected by the distribution of the difference between the gray values of the three horizontally adjacent fixed-size pixel points, and the corresponding criteria and basis were given by theoretical analysis. The experiment results showed that, compared with the method by artificial markers, the proposed algorithm can accurately identify the typical chasm defects inside the metal three-dimensional multi-layer lattice structure, and the recognition rate reaches 98.5%.

Key words： metrology metal lattice structure CT scanning image defect detection gray value sum additive manufacturing

收稿日期: 2018-11-01 发布日期: 2020-05-14

PACS:

TB96

基金资助:国家自然科学基金(61403333);河北省自然科学基金(E2017203240)

通讯作者: 张玉燕 E-mail: yyzhang@ysu.edu.cn

作者简介: 张玉燕(1976-),天津人,燕山大学教授,主要研究方向为光电检测与光纤传感、电容成像传感。Email: yyzhang@ysu.edu.cn

引用本文:

张玉燕,李永保,温银堂,张芝威. 基于CT图像的金属点阵结构内部缺陷检测方法[J]. 计量学报, 2020, 41(5): 544-550.
ZHANG Yu-yan,LI Yong-bao,WEN Yin-tang,ZHANG Zhi-wei. Method for Detecting Internal Defects of Metal Lattice Structure Based on CT Images. Acta Metrologica Sinica, 2020, 41(5): 544-550.

链接本文:

http://jlxb.china-csm.org:81/Jwk_jlxb/CN/10.3969/j.issn.1000-1158.2020.05.06 或 http://jlxb.china-csm.org:81/Jwk_jlxb/CN/Y2020/V41/I5/544

［1］梁永仁, 吴引江, 周济, 等. 点阵结构金属多孔材料制造技术［J］. 金属功能材料, 2012, 19(1): 63-67.
Liang Y R, Wu Y J, Zhou J, et al. Manufacturing technology on porous lattice metallic materials［J］. Metallic Functional Materials, 2012, 19(1): 63-67.
［2］Evans A G, Hutchinson J W, Fleck N A, et al. The topological design of multifunctional cellular metals［J］. Progress in Materials Science, 2001, 46(3-4): 309-327.
［3］赵冰, 李志强, 侯红亮, 等. 金属三维点阵结构制备技术研究进展［J］. 稀有金属材料与工程, 2016, 45(8): 2189-2200.
Zhao B, Li Z Q, Hou H L, et al. Research progress on fabrication methods of metal three dimensional lattice structure［J］. Rare Metal Materials & Engineering, 2016, 45(8): 2189-2200.
［4］Maskery I, Hussey A, Panesar A, et al. An investigation into reinforced and functionally graded lattice structures［J］. Journal of Cellular Plastics, 2016, 53(2): 256-263.
［5］Liu Y J, Li S J, Wang H L, et al. Microstructure, defects and mechanical behavior of beta-type titanium porous structures manufactured by electron beam melting and selective laser melting［J］. Acta Materialia, 2016, 113: 56-67.
［6］Liu F, Zhang D Z, Zhang P, et al. Mechanical properties of optimized diamond lattice structure for bone scaffolds fabricated via selective laser melting［J］. Materials, 2018, 11(3): 374-387.
［7］Warmuth F, Osmanlic F, Adler L, et al. Fabrication and characterisation of a fully auxetic 3D lattice structure via selective electron beam melting［J］. Smart Materials & Structures, 2017, 26(2): 025013.
［8］Mines R A W, Tsopanos S, Shen Y, et al. Drop weight impact behaviour of sandwich panels with metallic micro lattice cores［J］. International Journal of Impact Engineering, 2013, 60(10): 120-132.
［9］Horn T J, Harrysson O L A, Marcellin-Little D J, et al. Flexural properties of Ti6Al4V rhombic dodecahedron open cellular structures fabricated with electron beam melting［J］. Additive Manufacturing, 2014, 1-4: 2-11.
［10］Bai L, Xiong F, Chen X, et al. Multi-objective structural optimization design of Ti6Al4V lattice structure formed by SLM［J］. Journal of Mechanical Engineering, 2018, 54(5): 156-165.
［11］Mercelis P, Kruth J. Residual stresses in selective laser sintering and selective laser melting［J］. Rapid Prototyping Journal, 2013, 12(5): 254-265.
［12］郑世才. 我国射线检测技术近年的发展［J］. 无损检测, 2004, 26(4): 163-167.
Zheng S C. An overview of the latest advancement of radiology in China［J］. Nondestructive Testing, 2004, 26(4): 163-167.
［13］敬人可, 李建增, 周海林. 超声无损检测技术的研究进展［J］. 国外电子测量技术, 2012, 31(7): 28-30.
Jing R K, Li J Z, Zhou H L. Research progress of ultrasonic NDT technology［J］. Foreign Electronic Measurement Technology, 2012, 31(7): 28-30.
［14］郭健, 张丹, 马国义, 等. 无损检测(NDT)——磁粉检测(MT)技术［J］. 工程与试验, 2011, 51(3): 55-58.
Guo J, Zhang D, Ma G Y, et al. Nondestructive testing-magnetic particle testing technology［J］. Engineering & Test, 2011, 51(3): 55-58.
［15］张可佳,张碧丰,熊利民,等. EL红外缺陷测试仪关键参量校准方法研究［J］. 计量学报, 2018, 39(2): 246-250.
Zhang K J, Zhang B F, Xiong L M, et al. Research on Calibration Method Key Parameters of EL Infrared Defect Tester［J］. Acta Metrologica Sinica, 2018, 39(2): 246-250.
［16］刘晴岩. 液体渗透检测的可靠性［J］. 无损检测, 2002, 24(9): 381-383.
Liu Q Y. Reliability of liquid penetrant inspection［J］. Nonde Structive Testing, 2002, 24(9): 381-383.
［17］García-Martín J, Gómez-Gil J, Vázquez-Sánchez E. Non-destructive techniques based on eddy current testing［J］. Sensors, 2011, 11(3): 2525-2565.
［18］田源. 基于混合远景和近景区域暗通道算法的图像去雾研究［J］. 计量学报, 2019, 40(4): 583-588.
Tian Y. ＩｍａｇｅＤｅｈａｚｉｎｇＢａｓｅｄｏｎＮｅａｒａｎｄＦａｒＳｃｅｎｅＤａｒｋＣｈａｎｎｅｌＰｒｉｏｒ［J］. Acta Metrologica Sinica, 2019, 40(4): 583-588.

［19］郭文佳, 王向军. 基于实时帧间处理算法的爆点目标检测［J］. 计量学报, 2006, 27(z1): 38-41.
Guo W J,Wang X J. Detection Smoke Target Based on Real-time Difference in Image Sequences［J］. Acta Metrologica Sinica,2006, 27(z1): 38-41.
［20］孔明, 孟繁明, 王道档, 等. 圆柱工件表面缺陷视觉检测补偿方法研究［J］. 中国计量大学学报, 2018, 29(3): 244-250.
Kong M, Meng F M, Wang D D, et al. Research on a compensation method for the visual inspection of cylindrical workpiece defects［J］. Journal of China University of Metrology, 2018, 29(3): 244-250.