人造板中甲醛释放量的测定及不确定度评估

doi:10.3969/j.issn.1000-1158.2020.02.24

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (360 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要采用GB/T 17657—2013《人造板及饰面人造板理化性能试验方法》中的干燥器法,对卫浴家具中人造板甲醛释放量的检测过程进行试验研究,并依据JJF 1059.1—2012《测量不确定度评定与表示》分析影响甲醛释放量测定的各种不确定因素,量化和评定各不确定度分量。结果表明:甲醛释放量为(1.06±0.05)mg·L^-1,扩展不确定度的包含因子k＝2,其置信概率P=95％。经分析,由标准物质认定值和样品的重复测定引入的不确定度最大,其次为标准曲线拟合的变动性所引入的不确定度。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	谢美梅

关键词 ：计量学, 甲醛释放量, 干燥器法, 不确定度, 人造板

Abstract：The wood-based panel formaldehyde emission was tested by the desiccators method in GB/T 17657-2013 "Test method for physicochemical properties of wood-based panel ", the process of the detection was studied. All kinds of uncertainties were analyzed, which affected determination of formaldehyde emission and evaluated the components of uncertainty according to the JJF 1059.1-2012 "Evaluation and Expression of Uncertainty in Measurement" . The results showed that the formaldehyde emission was (1.06±0.05) mg·L_-1, when expanded uncertainty coverage factor k=2, fiducially probability P=95％. The analysis showed that the uncertainty of the reference value and the repeated determination of the sample contributed the most, followed by the uncertainty which was introduced by the variation of the standard curve fitting.

Key words： metrology formaldehyde emission desiccators method uncertainty wood-based panels

收稿日期: 2018-06-19 发布日期: 2020-02-17

PACS:

TB99

作者简介: 谢美梅(1991-),女,福建泉州人,南安市质量计量检测所助理工程师,主要从事化学检测分析方面的研究。Email: 511724022@qq.com

引用本文:

谢美梅. 人造板中甲醛释放量的测定及不确定度评估[J]. 计量学报, 2020, 41(2): 269-272.
XIE Mei-mei. Determination and Evaluation of the Uncertainty of the Formaldehyde Emission in Wood-based Panel. Acta Metrologica Sinica, 2020, 41(2): 269-272.

链接本文:

http://jlxb.china-csm.org:81/Jwk_jlxb/CN/10.3969/j.issn.1000-1158.2020.02.24 或 http://jlxb.china-csm.org:81/Jwk_jlxb/CN/Y2020/V41/I2/269