1. Shanghai Precision Metrology and Test Research Institute, Shanghai 201109, China
2. School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
Abstract：The referenceable calibration basis for low pressure/vacuum integrated environmental test equipment is not comprehensive at present, the analysis of applicable standard specification for low pressure integrated test equipment of different pressure ranges is given and the guiding conclusions are conducted through a numerical simulation. Numerical simulation results show that the test equipment with internal pressure greater than 1kPa can refer to standard GB/T 5170.10 for the calibration of temperature deviation and temperature uniformity. The tolerance requirement can be appropriately relaxed according to the increase of the working space and the decrease of the internal pressure. Radiation heat transfer occupy a dominant position in test equipment with air pressure less than 1kPa. The heat transfer efficiency is related to the placement of internal test pieces. It is not necessary to consider the temperature uniformity of the equipment. Reducing the space thermal resistance and surface thermal resistance in the measurement are the key to improving the measurement accuracy.
赵文韬,承磊,沈惠峰,曹家兴,倪博. 基于传热学的低气压/真空综合环境试验设备校准技术研究[J]. 计量学报, 2019, 40(4): 676-680.
ZHAO Wen-tao,CHENG Lei,SHEN Hui-feng,CAO Jia-xing,NI Bo. Study on Calibration of Low Pressure/Vacuum Comprehensive Environmental Test Equipment Based on Heat Transfer Theory. Acta Metrologica Sinica, 2019, 40(4): 676-680.
［1］易军, 黄蓓. JJF 1101—2003与GB/T 5170的异同分析［J］. 电子产品可靠性与环境试验, 2014, 32(6): 21-25.
Yi J, Huang B.Similarities and Differences Between JJF 1101—2003 and GB/T 5170 ［J］. Electronic Product Reliability and Environmental Testing, 2014, 32(6): 21-25.
［2］刘中华. 热真空试验标准与方法分析［J］. 电子产品可靠性与环境试验, 2016, 34(4): 16-20.
Liu Z H.Analysis of the Standards and Methods of Thermal Vacuum Test ［J］. Electronic Product Reliability and Environmental Testing, 2016, 34(4): 16-20.
［3］Anderson A D, Tannehill J C, Pletcher R H. Computational fluid mechanics and heat transfer ［M］. Washington DC: Hemisphere Publishing Corp, 1984.
［4］Sun P J, Wu J Y. Numerical and experiment studies of temperature field characteristic inside and irregularly-shaped cavity of a space environment simulator system ［J］. Experimental Thermal and Fluid Science, 2009, 33(5): 912-921.
［5］闫格, 杨建斌, 刘强, 等. 热真空环模试验中温度参数的探讨［J］. 真空与低温, 2011, 17(1): 32-36.
Yan G, Yang J B, Liu Q, et al. The Research of The Temperature in The Thermal Vacuum Environment Simulate Test ［J］. Vacuum and Cryogenics, 2011, 17(1): 32-36.
［6］黄永华, 承磊, 吴静怡, 等. 基于斯特林制冷机的氦气氛高低温箱深冷试验研究［J］. 上海交通大学学报, 2014, 48(9): 1309-1314.
Huang Y H, Cheng L, Wu J Y, et al. Experimental study on cooling performance of a thermal environment simulation chamber with helium atmosphere based on a Stirling cryogenerator ［J］. Journal of Shanghai Jiaotong University, 2014, 48(9): 1309-1314.
［7］杨世铭, 陶文铨. 传热学［M］. 4版. 北京: 高等教育出版社, 2006: 395-438.
［8］戴景民, 王新北. 材料发射率测量技术及其应用［J］. 计量学报, 2007, 28(3): 232-236.
Dai J M, Wang X B.Review of Emissivity Measurement and Its Application ［J］. Acta Metrologica Sinica, 2007, 28(3): 232-236.
［9］余时帆, 崔超, 王晓, 等. 固定发射率工作用辐射温度计校准方法研究［J］. 计量学报, 2017, 38(1): 40-42.
Yu S F, Cui C, Wang X, et al. The Calibration Method of Working Radiation Thermometer with Fixed Emissivity ［J］. Acta Metrologica Sinica, 2017,38(1): 40-42.
2019, Vol. 40 
