2025年04月07日 星期一 首页   |    期刊介绍   |    编 委 会   |    投稿指南   |    期刊订阅   |    统合信息   |    联系我们
计量学报  2018, Vol. 39 Issue (3): 431-435    DOI: 10.3969/j.issn.1000-1158.2018.03.29
  电离辐射、标准物质与生物计量 本期目录 | 过刊浏览 | 高级检索 |
衰荡光腔温度控制研究
曹珂1,梁超群2,郭瑞民1,张桂春1,邢素霞2,赵玉祥1
1. 中国计量科学研究院, 北京 100029
2. 北京工商大学, 北京 102488
Study on Temperature Control for Ring-Down Cavity
CAO Ke1,LIANG Chao-qun2,GUO Rui-min1,ZHANG Gui-chun1,XING Su-xia2,ZHAO Yu-xiang1
1. National Institute of Metrology, Beijing 100029, China
2. Beijing Technology and Business University, Beijing 102488, China
全文: PDF (1051 KB)   HTML (1 KB) 
输出: BibTeX | EndNote (RIS)      
摘要 研制出一套光腔衰荡光谱中的温度控制系统。首先,设计了内壁带有硅胶加热片的控温箱体,将光腔置于箱体中并模拟内部温度分布;然后,对箱体进行有限元分析及参数化扫描,得到最优化情况下加热片的分布及功率大小,保证光腔通光部分温度的均匀性;根据仿真结果完成实际控温箱体和加热片的加工,以比例积分微分(PID)控制算法为核心,设计包括温度采样模块、控制模块、驱动电路模块等在内的硬件电路系统,开发相应的控制算法,精密控制光腔内部的温度变化,实现衰荡光腔通光部分8 h内温度变化标准差不超过0.01 ℃。
服务
把本文推荐给朋友
加入我的书架
加入引用管理器
E-mail Alert
RSS
作者相关文章
曹珂
梁超群
郭瑞民
张桂春
邢素霞
赵玉祥
关键词 计量学光腔衰荡光谱温度控制有限元分析PID控制    
Abstract:A temperature control system for ring-down cavity is developed.The temperature control box with silicone heating plate on the inner wall is designed firstly, which the ring-down cavity is placed in. The internal temperature distribution is simulated. The finite element analysis and parametric scanning are carried out to get the optimized distribution and power of the heating plate to ensure the temperature uniformity along the light-transmitting part of the cavity. According to the simulation results, the actual box and heating plate are fabricated. Then, the hardware circuit system including temperature sampling module, control module and drive circuit module are designed with PID control algorithm as the core, and the corresponding control algorithm is developed to precisely control the cavity temperature change. After the precision temperature control system is completed, the standard deviation of the temperature variation along the light-transmitting part of the ring-down cavity is less than 0.01 ℃ in 8 hours.
Key wordsmetrology    cavity ring-down spectroscopy    temperature control    finite element analysis    PID control
收稿日期: 2016-11-21      发布日期: 2018-04-12
PACS:  TB99  
  TB96  
基金资助:国家重点研发计划专项(2016YFF0200305)
通讯作者: 郭瑞民     E-mail: guorm@nim.ac.cn
作者简介: 曹珂(1993-),女,安徽蚌埠人,中国计量科学研究院硕士,研究方向为光腔衰荡光谱技术。caoke@nim.ac.cn
引用本文:   
曹珂,梁超群,郭瑞民,张桂春,邢素霞,赵玉祥. 衰荡光腔温度控制研究[J]. 计量学报, 2018, 39(3): 431-435.
CAO Ke,LIANG Chao-qun,GUO Rui-min,ZHANG Gui-chun,XING Su-xia,ZHAO Yu-xiang. Study on Temperature Control for Ring-Down Cavity. Acta Metrologica Sinica, 2018, 39(3): 431-435.
链接本文:  
http://jlxb.china-csm.org:81/Jwk_jlxb/CN/10.3969/j.issn.1000-1158.2018.03.29     或     http://jlxb.china-csm.org:81/Jwk_jlxb/CN/Y2018/V39/I3/431
京ICP备:14006989号-1
版权所有 © 《计量学报》编辑部
地址:北三环东路18号(北京1413信箱)  邮编:100029 电话:(010)64271480
本系统由北京玛格泰克科技发展有限公司设计开发  技术支持:support@magtech.com.cn