2025年04月29日 星期二 首页   |    期刊介绍   |    编 委 会   |    投稿指南   |    期刊订阅   |    统合信息   |    联系我们
计量学报  2014, Vol. 35 Issue (3): 263-267    DOI: 10.3969/j.issn.1000-1158.2014.03.14
  本期目录 | 过刊浏览 | 高级检索 |
数字调制质量参数传递标准的研制
方宏,卞昕,周鑫,刘科,赵海宁
中国计量科学研究院,北京 100013
Development of Transfer Standard for Digital Modulation Quality Parameters
FANG Hong, BIAN Xin, ZHOU Xin, LIU Ke, ZHAO Hai-ning
National Institute of Metrology, Beijing 100013, China
全文: PDF (1587 KB)   HTML (1 KB) 
输出: BibTeX | EndNote (RIS)      
摘要 为了研制数字调制质量参数量值比对的传递标准,提出了一种基于星座图设计来实现对矢量信号发生器输出数字调制信号的调制误差进行准确设置的方法。给出了该方法的理论推导过程、实现方法,以及比对测量点的选取,最后通过测量实验,验证了所研制传递标准在比对测量点处的稳定性。
服务
把本文推荐给朋友
加入我的书架
加入引用管理器
E-mail Alert
RSS
作者相关文章
方宏
卞昕
周鑫
刘科
赵海宁
关键词 计量学数字调制误差星座图误差矢量幅度比对    
Abstract:In order to develop transfer standard of digital modulation quality parameters, a new method is proposed to set the modulation errors of the output digital modulation signal from vector signal generator accurately based on constellation diagram designing.Theoretical derivation, implementation and measurement points for comparison are presented.Stability of the developed transfer standard is verified by the statistics of the experimental data.
Key wordsMetrology    Digital modulation errors    Constellation diagram    Error vector magnitude    Comparison
    
基金资助:中国计量科学研究院专项业务费项目(ABD11)
作者简介: 方宏(1982-),男,江西上饶人,中国计量科学研究院副研究员,主要研究领域为无线电计量。fanghong@nim.ac.cn
引用本文:   
方宏,卞昕,周鑫,刘科,赵海宁. 数字调制质量参数传递标准的研制[J]. 计量学报, 2014, 35(3): 263-267.
FANG Hong, BIAN Xin, ZHOU Xin, LIU Ke, ZHAO Hai-ning. Development of Transfer Standard for Digital Modulation Quality Parameters. Acta Metrologica Sinica, 2014, 35(3): 263-267.
链接本文:  
http://jlxb.china-csm.org:81/Jwk_jlxb/CN/10.3969/j.issn.1000-1158.2014.03.14     或     http://jlxb.china-csm.org:81/Jwk_jlxb/CN/Y2014/V35/I3/263
京ICP备:14006989号-1
版权所有 © 《计量学报》编辑部
地址:北三环东路18号(北京1413信箱)  邮编:100029 电话:(010)64271480
本系统由北京玛格泰克科技发展有限公司设计开发  技术支持:support@magtech.com.cn