2025年04月05日 星期六 首页   |    期刊介绍   |    编 委 会   |    投稿指南   |    期刊订阅   |    统合信息   |    联系我们
计量学报  2018, Vol. 39 Issue (2): 182-186    DOI: 10.3969/j.issn.1000-1158.2018.02.09
  力学计量 本期目录 | 过刊浏览 | 高级检索 |
基于变分模态分解的关联维数及相关向量机的刀具磨损状态监测
何志坚,周志雄,黄向明
1. 湖南大学 机械与运载工程学院, 湖南 长沙 410082
2. 湖南信息职业技术学院, 湖南 长沙 410200
Tool Wear State Monitoring Based on Variational Mode Decomposition and Correlation Dimension and Relevance Vector Machine
HE Zhi-jian,ZHOU Zhi-xiong,HUANG Xiang-ming
1. College of Mechanical and Vehicle Engineering, Hunan University, Changsha, Hunan 410082,China
2. Hunan College of Information, Changsha, Hunan 410082,China
全文: PDF (959 KB)   HTML (1 KB) 
输出: BibTeX | EndNote (RIS)      
摘要 针对刀具磨损过程中产生的非平稳性信号,提出了基于变分模态分解的关联维数及相关向量机的刀具磨损状态监测方法。首先,利用变分模态分解对采集的声发射信号进行分解,获得一系列分量;其中部分分量跟磨损状态相关,部分分量是干扰噪声。为此根据分解后分量与原信号的互信息值提取出敏感分量;利用刀具信号特点确定关联维数的时延参数和嵌入维数,计算敏感分量的关联维数并组成特征向量;最后,将刀具不同状态的特征向量输入相关向量机进行训练与测试,从而实现对刀具磨损状态的监测。实验结果表明,该方法能够有效地识别出刀具磨损过程中不同的工作状态,且分类准确率较经验模态分解好。
服务
把本文推荐给朋友
加入我的书架
加入引用管理器
E-mail Alert
RSS
作者相关文章
何志坚
周志雄
黄向明
关键词 计量学刀具磨损声发射法状态识别变分模态分解关联维数相关向量机    
Abstract:According to unstable-state and non-linear characteristics of tool wear signal, a recognition method based on variational mode decomposition correlation dimension and relevance vector machine is proposed. First, the acoustic emission signal was decomposed by variational mode decomposition, then a series of components were obtained. The components generated by variational mode decomposition have different sensitivity to condition of tool wear. According to the mutual information of components, sensitive components were selected, which were used to calculate the correlation dimension of sensitive components and combined into a feature vector. Finally, the feature vector were input relevance vector machine, which will be classified, trained and tested, in order to identify the state of tool wear. By comparing classification accurate rate of variational mode decomposition and applied empirical model decomposition methods, the superiority of the proposed method based on variational mode decomposition is demonstrated in state recognition of tool wear.
Key wordsmetrology    tool wear    acoustic emission method    state recognition    VMD    correlation dimension    relevance vector machine
收稿日期: 2016-06-03      发布日期: 2018-02-11
PACS:  TB93  
基金资助:国家自然科学基金(51475158); 国家科技重大专项(2012ZX04003041)
通讯作者: 何志坚     E-mail: hnhzhijian@163.com
作者简介: 何志坚(1974-), 男, 湖南长沙人, 湖南大学高级工程师, 在读博士研究生, 主要研究方向为机械设备状态监测与故障诊断。hnhzhijian@163.com
引用本文:   
何志坚,周志雄,黄向明. 基于变分模态分解的关联维数及相关向量机的刀具磨损状态监测[J]. 计量学报, 2018, 39(2): 182-186.
HE Zhi-jian,ZHOU Zhi-xiong,HUANG Xiang-ming. Tool Wear State Monitoring Based on Variational Mode Decomposition and Correlation Dimension and Relevance Vector Machine. Acta Metrologica Sinica, 2018, 39(2): 182-186.
链接本文:  
http://jlxb.china-csm.org:81/Jwk_jlxb/CN/10.3969/j.issn.1000-1158.2018.02.09     或     http://jlxb.china-csm.org:81/Jwk_jlxb/CN/Y2018/V39/I2/182
京ICP备:14006989号-1
版权所有 © 《计量学报》编辑部
地址:北三环东路18号(北京1413信箱)  邮编:100029 电话:(010)64271480
本系统由北京玛格泰克科技发展有限公司设计开发  技术支持:support@magtech.com.cn