2024年12月16日 星期一 首页   |    期刊介绍   |    编 委 会   |    投稿指南   |    期刊订阅   |    统合信息   |    联系我们
计量学报  2023, Vol. 44 Issue (10): 1479-1486    DOI: 10.3969/j.issn.1000-1158.2023.10.01
  几何量计量 本期目录 | 过刊浏览 | 高级检索 |
特征点提取与坐标变换圆柱度最小区域评定
王强,汪伟
景德镇陶瓷大学 机械电子工程学院,江西,景德镇 333403
Feature Point Extraction and Coordinate Transformation Cylindricity Minimum Zone Evaluation
WANG Qiang ,WANG Wei
Mechanical and Electronic Engineering,Jingdezhen Ceramic Institute School, Jingdezhen, Jiangxi 333403, China
全文: PDF (609 KB)   HTML (1 KB) 
输出: BibTeX | EndNote (RIS)      
摘要 基于最小区域法评定方法中,存在对零件进行数据提取时其摆放位置会影响优化结果和多采样点求解繁琐局部收敛等问题,研究了最小区域圆柱度误差评定新方法。首先,建立了最小区域评定数学模型;然后,进行空间坐标变换投影,将圆柱体任意位置数据点转化为固定位置,将空间多采样点问题转换为平面进行特征点提取;最后,建立内外扫描区域和进行坐标轴线的更替,并对优化结果进行复核,实现有效防止出现局部最优解。实例检验结果表明:对数据样本最多的数据集,计算效率提高了1.5倍,可有效处理多采样点和任意位置采样点的圆柱度误差,且随着数据集样本点的增加计算效率提升越显著,具有较高的求解稳定性。
服务
把本文推荐给朋友
加入我的书架
加入引用管理器
E-mail Alert
RSS
作者相关文章
王强
汪伟
关键词 计量学圆柱度;坐标变换投影;特征点提取;最小区域评定内外扫描区域    
Abstract:For the minimum zone method based on the evaluation method, there are problems such as the placement of parts will affect the optimization results when the data extraction of parts is performed and the cumbersome local convergence of the multi-sampling point solution,a new method for evaluating the cylindricity error in the minimum zonen is studied. First, the minimum zone evaluation mathematical model is established. Then, the spatial coordinate transformation projection is carried out to transform the data points of any position of the cylinder into a fixed position, and the spatial multi-sampling point problem is converted into a plane for feature point extraction. Finally, the internal and external scanning area and the replacement of coordinate axes are set up and the results of optimization are reviewed to achieve effective prevention of local optimal solutions. The example test results show that for the dataset with the largest number of data samples, the computational efficiency is improved by 1.5 times, which can effectively handle the cylindricity error of multi-sampling points and sampling points at arbitrary position. Moreover, as the number of sample points in the dataset increases, the computational efficiency improves more significantly, and the solution has a high stability.
Key wordsmetrology    cylindricity    coordinate transformation projection    feature point extraction    minimum zone evaluation    inner and outer scanned zone
收稿日期: 2022-07-13      发布日期: 2023-10-10
PACS:  TB92  
基金资助:国家自然科学基金(52065028)
通讯作者: 汪伟(1985-),男,江西景德镇人,景德镇陶瓷大学副教授,主要从事几何量计量研究。Email: weiwangtaoda@163.com     E-mail: qiangwangjdz@163.com
作者简介: 王强(1997-),男,山东临沂人,景德镇陶瓷大学硕士研究生,研究方向为机构运动几何学。Email: qiangwangjdz@163.com
引用本文:   
王强,汪伟. 特征点提取与坐标变换圆柱度最小区域评定[J]. 计量学报, 2023, 44(10): 1479-1486.
WANG Qiang,WANG Wei. Feature Point Extraction and Coordinate Transformation Cylindricity Minimum Zone Evaluation. Acta Metrologica Sinica, 2023, 44(10): 1479-1486.
链接本文:  
http://jlxb.china-csm.org:81/Jwk_jlxb/CN/10.3969/j.issn.1000-1158.2023.10.01     或     http://jlxb.china-csm.org:81/Jwk_jlxb/CN/Y2023/V44/I10/1479
京ICP备:14006989号-1
版权所有 © 《计量学报》编辑部
地址:北三环东路18号(北京1413信箱)  邮编:100029 电话:(010)64271480
本系统由北京玛格泰克科技发展有限公司设计开发  技术支持:support@magtech.com.cn