基于标准表法的精密数字测温仪校准方法

doi:10.3969/j.issn.1000-1158.2022.02.11

摘要
图/表
参考文献(18)
相关文章 (15)

全文: PDF (523 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要参考流量与电学计量领域利用标准表对仪器进行校准的方法,提出一种采用高精度的测温电桥与高稳定性的直流电阻箱组合作为标准装置,校准精密数字测温仪的方法。用此方法对精密数字测温仪进行校准并进行测量不确定度分析,结果表明在-195~660℃氛围内,温度示值误差的合成标准不确定度为0.5~0.7mK。此方法采用的标准器准确度比现有的校准方法更高,并可以在更广的环境温度范围内应用。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	刘薇
	梁俣
	赵晶
	康慧雯
	金志军
	邱萍

关键词 ：计量学, 测温仪, 标准表法, 校准, 不确定度评定

Abstract：A method of calibrating high accuracy temperature indicators using the combination of DC comparator bridges for measuring temperatures and DC resistance box as the standard device was proposed, which referred to the method of calibrating the instrument using master meter method in the field of flow and electrical measurement. The method was used to calibrate a high accuracy temperature indicator, and the measurement uncertainty was analyzed. The calibration results showed that the combined standard uncertainty of temperature indication deviation was 0.5~0.7mK in the range of -195℃ to 660℃. The accuracy of the standard instrument used in this method was higher than that of other existing calibration methods, and it could also be applied in a wider range of ambient temperature.

Key words： metrology temperature indicator master meter method calibration uncertainty evaluation

收稿日期: 2021-08-25 发布日期: 2022-02-23

PACS:

TB942

基金资助:国家重点研发计划(2017YFF0205905)

通讯作者: 邱萍(1968-), 湖北武汉人, 中国计量科学研究院副研究员, 主要从事温度基标准研究及温度计量器具的研发工作。Email: qiup@nim.ac.cn E-mail: qiup@nim.ac.cn

作者简介: 刘薇(1991-), 北京人, 中国计量科学研究院助理工程师, 主要从事温度计量与材料热物性测量研究工作。Email: liuwei@nim.ac.cn

引用本文:

刘薇,梁俣,赵晶,康慧雯,金志军,邱萍. 基于标准表法的精密数字测温仪校准方法[J]. 计量学报, 2022, 43(2): 205-209.
LIU Wei,LIANG Yu,ZHAO Jing,KANG Hui-wen,JIN Zhi-jun,QIU Ping. High Accuracy Temperature Indicators Calibration by Master Meter Method. Acta Metrologica Sinica, 2022, 43(2): 205-209.

链接本文:

http://jlxb.china-csm.org:81/Jwk_jlxb/CN/10.3969/j.issn.1000-1158.2022.02.11 或 http://jlxb.china-csm.org:81/Jwk_jlxb/CN/Y2022/V43/I2/205

［1］胡鹏程, 时玮泽, 梅健挺. 高精度铂电阻测温系统［J］. 光学精密工程, 2014, 22(4): 988-995.
Hu P C, Shi W Z, Mei J T. High precision Pt-resistance temperature measurement system［J］. Optics and Precision Engineering, 2014, 22(4): 988-995.
［2］王龙, 李晓晖, 许广文,等. 高精度铂电阻测温仪的设计与实现［J］. 工业仪表与自动化装置, 2013(06): 59-61+119.
Wang L, Li X H, Xu G W, et al. Design and implementation of high precision platinum resistance thermometer［J］. Industrial Instrumentation & Automation, 2013(6): 59-61+119.
［3］潘华锋, 胡晓敏, 童长青, 等. 多通道1mK精密测温仪设计与实现［J］. 自动化仪表, 2020, 41(1): 69-71+76.
Pan H F, Hu X M, Tong C Q, et al. Design and Implementation of Multi-Channel 1mK Precision Thermometer［J］. Process Automation Instrumentation, 2020, 41(1): 69-71+76.
［4］李婷, 李建双, 缪东晶, 等. 温度条件对大尺寸测量装置精度影响的研究［J］. 计量学报, 2019, 40(6): 975-979.
Li T, Li J S, Miao D J, et al. Study of Temperature States Influence on the Accuracy of Large Size Measuring Devices［J］. Acta Metrologica Sinica, 2019, 40(6): 975-979.
［5］JJF 1664—2017 温度显示仪校准规范［S］.2017.
［6］李文娟. 数字温度指示调节仪示值误差测量结果的不确定度评定［J］. 计量与测试技术, 2009, 36(10): 53-54.
Li W J. Evaluation of Uncertainty about Indication Error of Digital Temperature Indica tors and Controllers in Measurement［J］. Metrology & Measurement Technique, 2009, 36(10): 53-54.
［7］赵婷婷, 韦宣, 由志勋,等. 高精度测温仪校准结果的测量不确定度评定［J］. 工业计量, 2016, 26(4): 11-14.
［8］JJF 1059. 1—2012 测量不确定度评定与表示［S］.2012.
［9］杨延平, 刘博韬, 徐明. 天然气工作级标准装置的能力提升［J］. 计量学报, 2021, 42(3): 339-345.
Yang Y P, Liu B T, Xu M. Capacity Improvement of Natural Gas Flow Standard Device［J］. Acta Metrologica Sinica, 2021, 42(3): 339-345.
［10］张翰, 李春辉, 崔骊水, 等. 高压环道气体流量标准装置［J］. 计量学报, 2017, 38(03): 324-327.
Zhanc H, Li C H, Cui L S, et al. The Close Loop Standard Facility of High-Pressure Gas Flow［J］. Acta Metrologica Sinica, 2017, 38(3): 324-327.
［11］邓千封, 张亮, 方立德, 等. 烟道流量计量标准装置［J］. 计量学报, 2020, 41(5): 567-572.
Deng Q F, Zhang L, Fang L D, et al. Stack Flowrate Standard Facility［J］. Acta Metrologica Sinica, 2020, 41(5): 567-572.
［12］胡开明, 李跃忠, 刘薇. 标准表法气体流量自动检定系统的设计与实现［J］. 机床与液压, 2019, 47(22): 93-97.
Hu K M, Li Y Z, Liu W. Design and Realization of Automatic Calibration System for Gas Flow by Master Meter Method［J］. Machine Tool & Hydraulics, 2019, 47(22): 93-97.
［13］刘辰魁, 李同波, 张红刚, 等. 气体流量标准装置的研制［J］. 计量学报, 2008, 29(5): 454-456.
Liu C K, Li T B, Zhang H G, et al. Development of Gas Flow Standard Facilities［J］. Acta Metrologica Sinica, 2008, 29(5): 454-456.
［14］Chun S J, Yoon B R, Choi H M, et al. Water flow meter calibration with a master meter method［J］. International Journal of Precision Engineering and Manufacturing, 2017, 18(8): 1075-1083.
［15］Smits F E, Rath J J. Calibration of prover tanks making use of a Coriolis mass flow meter as the master meter［J］. International Journal of Metrology & Quality Engineering, 2012, 3(2): 79-84.
［16］颜晓军, 扈蓓蓓, 李亚琭, 等. 一种新型的交流阻抗计量标准装置［J］. 计量学报, 2020, 41(5): 602-607.
Yan X J, Hu B B, Li Y L, et al. A New Type of AC Impedance Measurement Standard Device［J］. Acta Metrologica Sinica, 2020, 41(5): 602-607.
［17］JJG 982—2003 直流电阻箱［S］.2003.
［18］郭雨, 汪司珂, 郭沁. 直流电阻箱检定数据不合格原因分析［J］. 仪表技术, 2020(9): 1-2+39.
Guo Y, Wang S, Guo Q. Cause Analysis of Unqualified Verification Data of DC Resistance Box［J］. Instrumentation Technology, 2020(9): 1-2+39.