改进型封装固定点黑体在辐射测温中的应用

doi:10.3969/j.issn.1000-1158.2021.09.05

摘要
图/表
参考文献(21)
相关文章 (15)

全文: PDF (2004 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要为了延长固定点黑体容器使用寿命和简化使用流程,依据热管黑体和传统石墨坩埚黑体的设计使用经验,研制了改进型封装固定点黑体。针对所研制的锡固定点黑体分别用二等标准铂电阻和传递辐射温度计开展复现测试。改进型封装固定点黑体在经历20余次熔凝循环后,没有出现破裂和金属泄露现象。用标准铂电阻复现多次的平均值为231.909℃,扩展不确定度为0.015℃(k=2);而用固定点黑体校准传递辐射温度计的多次平均值为231.85℃,扩展不确定度为0.096℃(k=2)。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	刘裕盛
	蔡静

关键词 ：计量学, 固定点, 黑体, 辐射测温

Abstract：In order to prolong the service life of the fixed point blackbody and simplify the use process, based on the design and use experience of the heat pipe blackbody and the traditional graphite crucible blackbody, an improved package fixed point blackbody was developed. The second-class standard platinum resistance and transfer radiation thermometer are used to carry out the reproduction tests of the tin fixed-point blackbody. After more than 20 cycles of melting and freezing, there is no rupture and metal leakage in the improved encapsulated fixed point blackbody. The average value of multiple tests is 231.909℃, with the help of the standard platinum resistance thermometer, and the expanded uncertainty is 0.015℃(k=2). While with the fixed point blackbody used to calibrate the transfer radiation thermometer, the average value of multiple tests is 231.85℃, and the expanded uncertainty is 0.096℃(k=2).

Key words： metrology fixed point;blackbody;radiation thermometry

收稿日期: 2020-12-28 发布日期: 2021-09-24

PACS:

TB942

基金资助:“十三五”技术基础科研项目(JSJL2015205C001)

作者简介: 刘裕盛(1987-),江西九江人,北京长城计量测试技术研究所工程师,从事热学计量研究工作。Email:liuyushengbuaa@163.com

引用本文:

刘裕盛,蔡静. 改进型封装固定点黑体在辐射测温中的应用[J]. 计量学报, 2021, 42(9): 1149-1154.
LIU Yu-sheng,CAI Jing. Application of Improved Encapsulated Fixed Point Blackbody in Radiation Thermometry. Acta Metrologica Sinica, 2021, 42(9): 1149-1154.

链接本文:

http://jlxb.china-csm.org:81/Jwk_jlxb/CN/10.3969/j.issn.1000-1158.2021.09.05 或 http://jlxb.china-csm.org:81/Jwk_jlxb/CN/Y2021/V42/I9/1149

［1］董磊, 蔡静, 孟苏. 浴式黑体辐射源校准方法研究［J］. 计测技术, 2015(1):33-37.
Dong L, Cai J, Meng S. Research on calibration methods of bath blackbody source［J］. Metrology Measurement Technology, 2015(1):33-37.
［2］张磊, 郑小兵, 张黎明,等. 定量化红外遥感应用的高精度水浴黑体［J］. 光学技术, 2007, 33(2):245-248.
Zhang L, Zheng X B, Zhang L M,et al. High accuracy water bath blackbody based on the information quantification of infrared remote sensing［J］. Optical technique, 2007, 33(2):245-248.
［3］Machin G , Chu B . High quality blackbody sources for infra-red thermometry and thermography between -40℃ and 1000℃［J］. The Imaging Science Journal, 2000, 48(1):15-22.
［4］Hill K D , Woods D J. Characterizing the NRC blackbody sources for radiation thermometry from 150℃ to 962℃［J］. International Journal of Thermophysics, 2009, 30(1):105-123.
［5］黄燊彦, 郝小鹏, 王景辉,等. 铯、钠热管标准黑体辐射源研制及性能评价［J］. 计量学报, 2014, 35(2):120-124.
Huang S Y, Hao X P, Wang J H, et al. Development and characterization of Cesium, Sodium heat pipe standard blackbody radiation sources［J］. Acta Metrologica Sinica, 2014, 35(2): 120-124.
［6］孔令辉. 中温固定点黑体辐射源研制及性能评价［D］. 成都:成都理工大学, 2013.
［7］吴继彧, 原遵东, 段宇宁,等. 辐射法锌凝固点复现及其不确定度评定［J］. 现代计量测试, 2000,(5):9-13.
Wu J Y, Yuan Z D, Duan Y N, et al. Realization of Zinc fixed-point by radiation thermometry and its uncertainty evaluation［J］.Modern Measurement and Test, 2000,(5):9-13.
［8］赵琪, 李大今, 原遵东,等. 辐射法复现铜凝固点［J］. 计量学报, 1987,8(1):3-8.
Zhao Q, Li D J, Yuan Z D, et al. The realization of the copper freezing point by pyrometry［J］. Acta Metrologica Sinica, 1987,8(1):3-8.
［9］宋健, 郝小鹏, 丁雷,等. 真空低背景红外高光谱亮温计量标准装置研制［J］. 红外与激光工程, 2019, 48(10) :26-32.
Song J, Hao X P, Ding L, et al. Development of reduced background vacuum infrared hyperspectral radiance temperature standard facility［J］. Infrared and Laser Engineering, 2019, 48(10):26-32.
［10］张建岭. 热力学温度测量中的滤光片辐射计特性研究［D］. 北京:华北电力大学, 2012.
［11］Abasov M Y , Gerasimov S F , Ivanova A G , et al. Measurement of Al freezing-point temperature: effect of initiation process［J］. International Journal of Thermophysics, 2010, 31(8-9):1663-1675.
［12］Khlevnoy B B , Yamada Y , Samoylov I A G L. Comparison of Re-C fixed-point cells and their T90 temperatures between NMIJ and VNIIOFI［J］. International Journal of Thermophysics, 2011,32:1753-1762.
［13］Khlevnoy B B , Grigoryeva I A, Otryaskin D A. Development and investigation of WC-C fixed-point cells［J］. Metrologia, 2012, 49(2):S59-S67.
［14］Anhalt K, Wang Y F, Yamada Y, et al. Large and small aperture fixed-point cells of Cu, Pt-C, and Re-C［J］. International Journal of Thermophysics, 2008, 29(3):969-983.
［15］Battuello M, Girard F, Florio M. Small copper fixed-point cells of the hybrid type to be used in place of normal larger cells［J］. Measurement Science and Technology, 2012, 23:105002.
［16］Wang T, Lowe D, Machin G. Manufacturing of MC eutectics and reproducibility of Pt-C eutectic fixed points using a thermogauge furnace［J］. International Journal of Thermophysics, 2009, 30(1):59-68.
［17］李凯, 郝小鹏, 宋健,等. 真空汞固定点黑体辐射源的设计与研制［J］. 计量学报, 2020, 41(4):413-418.
Li K, Hao X P, Song J, et al. Design and development of vacuum mercury fixed point blackbody radiation source［J］. Acta Metrologica Sinica, 2020, 41(4):413-418.
［18］文平, 郝小鹏, 孙建平,等. 基于微型镓基共晶固定点的温度传感器在轨校准方法研究［J］. 计量学报, 2019, 40(4): 595-602.
Wen P, Hao X P, Sun J P, et al. On-orbit calibration of temperature sensor based on miniature gallium-based alloy fixed point［J］. Acta Metrologica Sinica, 2019, 40(4): 595-602.
［19］胡朝云, 郝小鹏, 宋健,等. 红外高光谱大气探测仪星载固定点黑体辐射源的研制［J］. 计量学报, 2019, 40(2): 232-239.
Hu C Y, Hao X P, Song J, et al. Development of blackbody radiation sources at fixed point on satellite of infrared hyperspectral atmospheric detector［J］. Acta Metrologica Sinica, 2019, 40(2): 232-239.
［20］刁福广, 蔡晋辉, 孙建平,等. Ga-In-Sn微型共晶点相变特性研究［J］. 计量学报, 2019, 40(3):421-426.
Diao F G, Cai J H, Sun J P, et al. Study on phase transition characteristic of mini Ga-In-Sn eutectic fixed point［J］. Acta Metrologica Sinica, 2019, 40(3):421-426.
［21］Vasil'ev E V, Ignatov A A, Kalinin M I, et al. Investigation of the reproducibility of melting and freezing curves for tin in a miniature cell［J］. Measurement techniques, 2018, 61(5):494-500.