2025年05月22日 星期四 首页   |    期刊介绍   |    编 委 会   |    投稿指南   |    期刊订阅   |    统合信息   |    联系我们
计量学报  2021, Vol. 42 Issue (7): 944-949    DOI: 10.3969/j.issn.1000-1158.2021.07.17
  电离辐射、标准物质与生物计量 本期目录 | 过刊浏览 | 高级检索 |
大反射负载牵引测量系统校准参数优化选取及应用
张立飞,杜静,王一帮,栾鹏,吴爱华,梁法国
中国电子科技集团公司第十三研究所,河北 石家庄 050051
Selection and Application of Calibration Parameter Optimization for Traction Measurement System with Large Reflective Load
ZHANG Li-fei,DU Jing,WANG Yi-bang,LUAN Peng,WU Ai-hua,LIANG Fa-guo
The 13th Research Institute of China Electronics Technology Group Corporation, Shijiazhuang, Hebei 050051, China
全文: PDF (2613 KB)   HTML (1 KB) 
输出: BibTeX | EndNote (RIS)      
摘要 相对于传统负载牵引测量系统,大反射负载牵引测量系统可以对微波功率放大器件的负载阻抗端实现更大的调配范围,成为目前比较流行的测量方案。对大反射负载牵引测量系统的验证,一般选择转换功率增益作为负载牵引测量系统优化验证参数。通过对比功率增益和转换功率增益的理论值和测量值的偏差,认为在大反射条件下,功率增益对系统校准后的剩余误差更加敏感,对系统准确度优化提升效果更好。最后通过功率优化的应用实验验证,在负载反射系数为0.9时,转换功率增益变化0.4dB,而功率增益变化0.8dB,因此,选取功率增益作为大反射优化校准参数效果更明显,而在小反射系数下可选择转换功率增益作为负载牵引测量系统验证参数。
服务
把本文推荐给朋友
加入我的书架
加入引用管理器
E-mail Alert
RSS
作者相关文章
张立飞
杜静
王一帮
栾鹏
吴爱华
梁法国
关键词 计量学负载牵引功率增益微波功率放大器件转换功率增益    
Abstract:Compared with traditional load-pull measurement systems, the active hybrid load-pull measurement system can achieve a larger load impedance adjustment range for microwave power amplifier device testing, which has become a popular measurement solution.For the verification of active hybrid load-pull measurement system, the transducer gain is generally selected as the optimization verification parameter of the load traction measurement system.By comparing the deviation between the theoretical value and the measured value of the power gain and the transducer gain, it is observed that under large reflection conditions, the power gain is more sensitive for the residual error after system calibration, and the effect of optimizing and improving the system accuracy is better.Finally, it is verified by the application experiment of power optimization, it is observed that when the load reflection coefficient reaches 0.9, the transducer gain changes 0.4dB, whereas the power gain changes 0.8dB.Therefore, the effect of selecting the power gain as a large reflection optimization calibration parameter is more obvious.However, under a small reflection coefficient, the transducer gain can be selected as the verification parameter of the load traction measurement system.
Key wordsmetrology    load-pull    power gain    microwave power amplifier device    transducer gain
收稿日期: 2020-02-25      发布日期: 2021-07-15
PACS:  TB973  
基金资助:国家重点仪器研发专项(2016YFF0102105)
作者简介: 张立飞(1986-),女,河北晋州人,中国电子科技集团公司第十三研究所助理工程师,研究方向为无线电计量测试。Email:449083296@qq.com
引用本文:   
张立飞,杜静,王一帮,栾鹏,吴爱华,梁法国. 大反射负载牵引测量系统校准参数优化选取及应用[J]. 计量学报, 2021, 42(7): 944-949.
ZHANG Li-fei,DU Jing,WANG Yi-bang,LUAN Peng,WU Ai-hua,LIANG Fa-guo. Selection and Application of Calibration Parameter Optimization for Traction Measurement System with Large Reflective Load. Acta Metrologica Sinica, 2021, 42(7): 944-949.
链接本文:  
http://jlxb.china-csm.org:81/Jwk_jlxb/CN/10.3969/j.issn.1000-1158.2021.07.17     或     http://jlxb.china-csm.org:81/Jwk_jlxb/CN/Y2021/V42/I7/944
京ICP备:14006989号-1
版权所有 © 《计量学报》编辑部
地址:北三环东路18号(北京1413信箱)  邮编:100029 电话:(010)64271480
本系统由北京玛格泰克科技发展有限公司设计开发  技术支持:support@magtech.com.cn