Abstract：At the end of 2014, the first gas flow close loop standard facility in China was built in National Institute of Metrology (NIM). The standard facility uses four DN100 turbine flowmeters as master meters, and the achievable flowrate range is 40~1400m3/h as well as the pressure range is 190~2500kPa. Based on the in-situ calibration technology of the master meter and the pressure measurement method of absolute pressure+differential pressure, the best uncertainty of the standard facility to calibrate the flowmeter is 0.18%(k=2). In January 2020, the gas flow close loop standard facility passed the construction standard assessment, and the testing service was officially launched in March 2020.
李春辉,崔骊水,王池,曹鹏,王粟. 环道式气体流量标准装置的不确定度评估及能力验证[J]. 计量学报, 2020, 41(12A): 7-10.
LI Chun-hui,CI Li-shui,WANG Chi,CAO Peng,WANG Su. Uncertainty Evaluation and Capability Verification of Gas Flow Close Loop Standard Facility. Acta Metrologica Sinica, 2020, 41(12A): 7-10.
［1］BP Statistical Review of Word Energy［EB］. https://www.bp.com/en/global/corporate/energy-economics/statistical-review-of-world-energy.html.［2020-08-19］.
［2］Wright J D, Mickan B, Vallet J P, et al. Extended data analysis of bilateral comparisons with air and natural gas up to 5 MPa［C］//Flomeko, Sydney Australia, 2016.
［3］Li C H, Mickan B, Cui L S, et al. The high pressure sonic nozzle gas flow standard facility in NIM［C］//Flomeko, Lisbon, Portuguesa, 2019.
［4］Bremser W, Hasselbarth W, Hirlehei U, et al. Uncertainty analysis and long-term stability investigation of the German primary high-pressure natural gas test facility Pigsar［C］//Flomeko, Groningen, 2003.
［5］苏一林. 基于高压音速喷嘴法气体流量标准装置的涡轮流量计计量性能研究［D］. 保定: 河北大学, 2017.
［6］Cox M G. The Evaluation of key comparison data［J］. Metrologia, 2002, 39(6): 589-595.
［7］Cox M G. The evaluation of key comparison data: determining the largest consistent subset［J］. Metrologia, 44(3): 187-200, 2007.
