2025年05月05日 星期一 首页   |    期刊介绍   |    编 委 会   |    投稿指南   |    期刊订阅   |    统合信息   |    联系我们
计量学报  2020, Vol. 41 Issue (12): 1544-1551    DOI: 10.3969/j.issn.1000-1158.2020.12.16
  无线电、时间频率计量 本期目录 | 过刊浏览 | 高级检索 |
一种数字时钟的校准方法及验证装置
张宇1,陈静2,龙波1,黄徐瑞晗1,王菊凤1,韩锋1,沈力1
1. 贵州省计量测试院,贵州 贵阳 550003
2. 贵州省机械电子产品质量检验检测院,贵州 贵阳 550081
A Calibration Method and Testing Device of Digital Clock
ZHANG Yu1,CHEN Jing2,LONG Bo1,HUANG-XU Rui-han1,WANG Ju-feng1,HAN Feng1,SHEN Li1
1. Institute for Metrology and Calibration of Guizhou, Guiyang, Guizhou 550003, China
2. Inspection Institute of Quality Supervision Machinery & Electronics Products, Guiyang, Guizhou 550081, China
全文: PDF (1762 KB)   HTML (1 KB) 
输出: BibTeX | EndNote (RIS)      
摘要 为准确测量数字时钟示值偏差,保障数字时钟溯源的有效性,提出并设计一种数字时钟的校准方法及验证装置。采用PIN结硅光电二极管对数字时钟的数码管进行检测,将多路检测信号运算放大,与阈值电压进行比较后输出逻辑电平,再经过秒脉冲发生电路输出秒脉冲信号与标准时间秒脉冲进行比较测量。实验表明,验证装置延时223.4ns,不确定度为100.1ns(k=1)。
服务
把本文推荐给朋友
加入我的书架
加入引用管理器
E-mail Alert
RSS
作者相关文章
张宇
陈静
龙波
黄徐瑞晗
王菊凤
韩锋
沈力
关键词 计量学数字时钟秒脉冲光电二极管溯源    
Abstract:To measure accurately offset of indication for digital clock and ensure traceability, a calibration method and testing device of digital clock are proposed and designed. The PIN silicon photodiode is used to detect the digital tube of digital clock, the multi-channel detection signal is amplified and compared with the threshold voltage to output TTL, and then the 1PPS is output through the 1PPS generation circuit, which is compared with the standard 1PPS. The experiment show that the delay of the testing device is 223.4ns (U=100.1ns, k=1).
Key wordsmetrology    digital clock    1PPS    photodiode    traceability
收稿日期: 2020-08-04      发布日期: 2020-12-08
PACS:  TB939  
基金资助:贵州省科技计划(黔科合支撑[2019]2881号)
通讯作者: 龙波(1978-),男,贵州贵阳人,贵州省计量测试院正高级工程师,主要从事时间频率计量工作。Email: 88392967@qq.com     E-mail: 88392967@qq.com
作者简介: 张宇(1992-),男,贵州六盘水人,贵州省计量测试院工程师,主要从事时间频率计量研究工作。Email: 617249407@qq.com
引用本文:   
张宇,陈静,龙波,黄徐瑞晗,王菊凤,韩锋,沈力. 一种数字时钟的校准方法及验证装置[J]. 计量学报, 2020, 41(12): 1544-1551.
ZHANG Yu,CHEN Jing,LONG Bo,HUANG-XU Rui-han,WANG Ju-feng,HAN Feng,SHEN Li. A Calibration Method and Testing Device of Digital Clock. Acta Metrologica Sinica, 2020, 41(12): 1544-1551.
链接本文:  
http://jlxb.china-csm.org:81/Jwk_jlxb/CN/10.3969/j.issn.1000-1158.2020.12.16     或     http://jlxb.china-csm.org:81/Jwk_jlxb/CN/Y2020/V41/I12/1544
京ICP备:14006989号-1
版权所有 © 《计量学报》编辑部
地址:北三环东路18号(北京1413信箱)  邮编:100029 电话:(010)64271480
本系统由北京玛格泰克科技发展有限公司设计开发  技术支持:support@magtech.com.cn