2025年04月07日 星期一 首页   |    期刊介绍   |    编 委 会   |    投稿指南   |    期刊订阅   |    统合信息   |    联系我们
计量学报  2019, Vol. 40 Issue (6A): 145-149    DOI: 10.3969/j.issn.1000-1158.2019.6A.031
  流量计量 本期目录 | 过刊浏览 | 高级检索 |
测温元件加工及安装对喷嘴标准装置校准数据的影响分析
刘喆1,2,3, 张福元1,2, 宋超凡1,2, 李振林3
1.国家石油天然气大流量计量站南京分站, 江苏南京 210058
2.国家石油天然气大流量计量站广州分站, 广东广州 510940
3.中国石油大学(北京),北京 102249)
Analysis of the Influence of the Size and Installation for Temperature Measuring Elements on the Calibration of CFV Nozzle Standard
LIU Zhe1,2,3, ZHANG Fu-yuan1,2, SONG Chao-fan1,2, LI Zhen-lin3
1.Nanjing Branch of National Station of Petroleum & Natural Gas Flow Measurement, Nanjing, Jiangsu 210058,China
2.Guangzhou Branch of National Station of Petroleum & Natural Gas Flow Measurement, Guangzhou, Guangdong 510940, China
3.China University of Petroleum-Beijing,Beijing 102249,China
全文: PDF (458 KB)   HTML (1 KB) 
输出: BibTeX | EndNote (RIS)      
摘要 为进一步验证测温元件大小及安装位置对喷嘴计量数据的影响,选取了A站、B站和C站喷嘴标准装置的校准数据与JJG 620计算的标准值进行了比对分析,并采用最小二乘法进行回归验证。结果表明:测温元件的加工和安装应符合JJG 620—2008和GB/T 21188—2007的要求,对于测温元件不符合要求的喷嘴应在校准范围使用,不可外延。
服务
把本文推荐给朋友
加入我的书架
加入引用管理器
E-mail Alert
RSS
作者相关文章
刘喆
张福元
宋超凡
李振林
关键词 计量学测温元件标准装置回归分析外延    
Abstract:In order to further verify the influence of temperature measuring element size and installation position on nozzle measurement data, the calibration data of nozzle standard device in station A, station B and station C were selected for comparative analysis with the standard value calculated by JJG 620, and the least square method was used for regression verification. The results show that the processing and installation of the temperature measuring elements should meet the requirements of JJG 620—2008 and GB/T 21188—2007, and the nozzle that does not meet the requirements of the temperature measuring elements should be used in the calibration range, not extended.
Key wordsmetrology    temperature measuring element    standard device    regression analysis    extended application
收稿日期: 2019-09-20     
PACS:  TB937  
作者简介: 刘喆(1988-), 辽宁铁岭人, 国家石油天然气大流量计量站南京和广州分站工程师, 主要从事天然气计量工作。Email: njliuzhe@petrochina. com. cn
引用本文:   
刘喆, 张福元, 宋超凡, 李振林. 测温元件加工及安装对喷嘴标准装置校准数据的影响分析[J]. 计量学报, 2019, 40(6A): 145-149.
LIU Zhe, ZHANG Fu-yuan, SONG Chao-fan, LI Zhen-lin. Analysis of the Influence of the Size and Installation for Temperature Measuring Elements on the Calibration of CFV Nozzle Standard. Acta Metrologica Sinica, 2019, 40(6A): 145-149.
链接本文:  
http://jlxb.china-csm.org:81/Jwk_jlxb/CN/10.3969/j.issn.1000-1158.2019.6A.031     或     http://jlxb.china-csm.org:81/Jwk_jlxb/CN/Y2019/V40/I6A/145
京ICP备:14006989号-1
版权所有 © 《计量学报》编辑部
地址:北三环东路18号(北京1413信箱)  邮编:100029 电话:(010)64271480
本系统由北京玛格泰克科技发展有限公司设计开发  技术支持:support@magtech.com.cn