2025年01月12日 星期日 首页   |    期刊介绍   |    编 委 会   |    投稿指南   |    期刊订阅   |    统合信息   |    联系我们
计量学报  2014, Vol. 35 Issue (5): 414-419    DOI: 10.3969/j. issn.1000-1158.2014.05.02
  本期目录 | 过刊浏览 | 高级检索 |
复合评定法在三维粗糙表面评定中的应用
任志英1,2,高诚辉1,2,林建兴1,申丁1,黄健萌1
1.福州大学机械工程及自动化学院,福建福州350108; 
2.福州大学摩擦学研究所,福建福州350002
Application of Composite Evaluation Method in the Assessment of Three-dimensional Rough Surface
REN Zhi-ying1,2, GAO Cheng-hui1,2,LIN Jian-xing1, SHEN Ding1, HUANG Jian-meng1#br#
1.College of Mechanical Engineering of Fuzhou University, Fuzhou, Fujian 350108 China;
2.The Tribology Institute of Fuzhou University, Fuzhou, Fujian 350002 China
全文: PDF (3348 KB)   HTML (1 KB) 
输出: BibTeX | EndNote (RIS)      
摘要 提出一种将双树复小波与分形理论相结合的复合评定方法。即利用双树复小波近似的平移不变性和方 向性好等优点,将信号分解成更为细腻的低频和高频信号,同时根据多尺度下信号分形维数的不变性,利用图像灰 度值自相关求得高低频信号的分形维数,通过计算高低频信号分形维数之间的差值(即分形维数距)来确定双树复 小波的分解尺度。仿真结果表明复合评定法可以较好地提取基准面,且分形维数距确定分解层数的准确性通过均 方根*Sq值得到了验证;两个实例均说明,复合评定法可以很好地提取具有分形特征的纳米级三维粗糙表面基准或 波纹度,为实际工程表面评定提供了可靠的理论基础。
服务
把本文推荐给朋友
加入我的书架
加入引用管理器
E-mail Alert
RSS
作者相关文章
关键词 计量学粗糙表面分形理论双树复小波复合评定
    
Abstract: Engineering surfaces always have fractal characteristics and now a composite evaluation method is proposed in which the dual tree complex wavelet combined with fractal theory. By using the dual-tree complex wavelets approximate translation invariance and good directions, signal is decomposed into a more delicate low and high frequency signals. Meanwhile, according to the invariance of the signals fractal dimension under multi - scale, the fractal dimension of signals is obtained by the use of the autocorrelation image gray value, and the dual tree complex wavelets decomposition scale is verified by calculating the different fractal dimensions between the high and low frequency signals (the fractal dimension distance). The simulation results show that the datum can be well extracted by the use of the composite evaluation method, and the accuracy of decomposition level which is confirmed by the fractal dimension distance is verified by the use of the root mean square value. Two examples illustrate that reference and waviness of the nano-scale three-dimensional rough surfaces which have fractal characteristic can be well extracted by the use of the composite evaluation method, which provides a reliable theoretical basis for the assessment of the actual engineering surface.
Key wordsMetrology    Rough surface    Fractal theory    Dual-tree complex wavelet    Composite assessment
    
基金资助:国家自然科学基金(51175085);国家青年自然科学基金(51205062);福建省教育厅A类资助项目(JA13059);福州大学科技发 展基金(600907)
通讯作者: 高诚辉为通讯作者。gch@fzu.edu.cn   
作者简介: 任志英(1980 -),女,浙江嵊州人,福州大学讲师,博士研究生,主要从事摩擦学中表面表征方法研究。renzF@se@126.com
引用本文:   
任志英,高诚辉,林建兴,申丁,黄健萌. 复合评定法在三维粗糙表面评定中的应用[J]. 计量学报, 2014, 35(5): 414-419.
REN Zhi-ying1,2, GAO Cheng-hui1,2,LIN Jian-xing1, SHEN Ding1, HUANG Jian-meng1. Application of Composite Evaluation Method in the Assessment of Three-dimensional Rough Surface. Acta Metrologica Sinica, 2014, 35(5): 414-419.
链接本文:  
http://jlxb.china-csm.org:81/Jwk_jlxb/CN/ 10.3969/j. issn.1000-1158.2014.05.02     或     http://jlxb.china-csm.org:81/Jwk_jlxb/CN/Y2014/V35/I5/414
京ICP备:14006989号-1
版权所有 © 《计量学报》编辑部
地址:北三环东路18号(北京1413信箱)  邮编:100029 电话:(010)64271480
本系统由北京玛格泰克科技发展有限公司设计开发  技术支持:support@magtech.com.cn