Abstract：On the basis of the principle of optical disc data jitter generator and Bessel-zero method, a method to measure the jitter based on Bessel-zero method is proposed. Then, the calibration system of optical disc jitter and its evaluation of uncertainty in measurement are described. The results of theoretical analysis and experiments indicate that its expanded uncertainty of measurement is 0.13% in CD mode, and 0.18% in DVD mode.
［1］吴昭春,杨智君,马晓庆. 基于贝塞尔零值法的抖动发生装置研究［J］. 仪器仪表学报,2007,28:4-7.
［2］Shimanouchi M. An Approach to Consistent Jitter Modeling for Various Jitter Aspects and Measurement Methods［A］. Proc IEEE International Test Conference 2001 ［C］, Maryland: 2001, 848-857.
［3］Ma Li-jun, Xu Duan-yi, Pan Long-fa. Analysis and study on measurement of jitter and its precision ［J］. Proc SPIE, 2001, 4085: 253-257.
［4］谢登科,齐国生,徐端颐,等. 高倍速光盘抖动测试系统设计［J］. 光电子·激光,2004,15(3): 279-282.
［5］朱群范. 抖动标准检定装置研究报告［R］.北京: 中国计量科学研究院,1988.
［6］ISO/IEC 10149. Data interchange on read-only 120mm optical data disks (CD- ROM)［S］. ANSI, 1995.
［7］ISO/IEC 16448. 120 mm DVD Read-only disk［S］. ANSI, 2002.
［8］Broderick P. Effect of distortion on the Bessel-zero method of frequency deviation measurement［J］. Proc IEE Electronic Record,1966,113(5):740-746.
［9］Broderick P. FM Deviation measurements［J］.The Radio and electronic engineer, 1968,35(5):281-293.
［10］倪育才. 实用测量不确定度评定［M］. 北京:中国计量出版社,2004.
2010, Vol. 31 
