1000V多盘感应分压器标准建立

王维,刘夏,张欣

计量学报 ›› 2020, Vol. 41 ›› Issue (7) : 852-856.

PDF(1929 KB)
PDF(1929 KB)
计量学报 ›› 2020, Vol. 41 ›› Issue (7) : 852-856. DOI: 10.3969/j.issn.1000-1158.2020.07.14
电磁学计量

1000V多盘感应分压器标准建立

  • 王维,刘夏,张欣
作者信息 +

Research on 1000V Multi-decade Inductive Voltage Divider Standard

  • WANG Wei,LIU Xia,ZHANG Xin
Author information +
文章历史 +

摘要

中国计量科学研究院研制了一台1000V多盘感应分压器标准装置,用作工频1000V电压比例标准。该装置使用了一种基于互感器注入的误差补偿技术,可准确提供从1×10-8到1的宽范围比例出。感应分压器的误差校验使用了包含三同轴屏蔽技术的改进型参考电势增量法,并设计了多比例参考互感器以便对感应分压器进行整体校验。所研制的感应分压器准确度优于1×10-7,校准结果不确定度小于2×10-8。

Abstract

A multi-decade 1000V inductive voltage divider (IVD) was established at the National Institute of Metrology (NIM) in China to function as the 1000V voltage ratio standard at the power frequency. It can provide a wide output ratio ranging from 1×10-8 to 1. An error compensation method, based on the transformer injection, was introduced to improve the output ratio accuracy. An improved bootstrap calibration method with triaxial shielding was presented, and a multi-ratio reference transformer was designed to calibrate the multi-decade IVD for combinational usage. The accuracy of the mentioned IVD is better than 1×10-7 and the calibration expanded uncertainty less than 2×10-8.

关键词

计量学 / 电压比例标准 / 感应分压器 / 三同轴屏蔽 / 误差补偿 / 参考互感器

Key words

metrology / voltage ratio standard / inductive voltage divider / triaxial shielding / error compensation / reference transformer

引用本文

导出引用
王维,刘夏,张欣. 1000V多盘感应分压器标准建立[J]. 计量学报. 2020, 41(7): 852-856 https://doi.org/10.3969/j.issn.1000-1158.2020.07.14
WANG Wei,LIU Xia,ZHANG Xin. Research on 1000V Multi-decade Inductive Voltage Divider Standard[J]. Acta Metrologica Sinica. 2020, 41(7): 852-856 https://doi.org/10.3969/j.issn.1000-1158.2020.07.14
中图分类号: TB971   

参考文献

[1]IEC 60618 Inductive voltage dividers[S].  1978.
[2]Small G W, Budovsky I F,  Gibbes A M, et al.Precision Three-stage 1000 V/50 Hz Inductive Voltage Divider[J]. IEEE Trans. Instrum. Meas., 2005, 54(2):600-603.
[3]BudovskyI  F, Small G W,  Gibbes A M,  et al. Calibration of 1000 V/50 Hz Inductive Voltage Dividers and Ratio Transformers[C]// CPEM 2004. London, 2004: 322-323.
[4]何小兵. 基于参考电势法校验感应分压器的几种校验方法综述与分析[C]// 第4届全国电磁计量大会. 桂林, 2007.
[5]Wang W. Establishing of 1000 V Multi-decade Inductive Voltage Divider Standard at NIM[C]// Proc CPEM 2016. Ottawa, Canada, 2016.
[6]Zhao J, Yang Y, Lu Y,  et al. An Improved Bootstrap Method for the Calibration of Inductive Voltage Dividers[C]// CPEM 2012. Washington D.C., 2012: 690-691.
[7]王雪,郑天宇,项琼, 等.气隙对电流比较仪磁屏蔽屏蔽效能影响的研究[J].  计量学报, 2018, 39(4): 549-553.
Wang X, Zheng T Y, Xiang Q, et al. Research on Air Gap Influence on Magnetic Shielding Effectiveness for Current Comparator[J]. Acta Metrologica Sinica, 2018, 39(4): 549-553.
[8]张煌辉,林飞鹏,邵海明, 等.直流高压电阻分压器泄漏电流测量研究[J].  计量学报, 2018, 39(1): 83-88.
Zhang H H, Lin F P, Shao H M, et al. Research on Measuring Leakage Current of DC High-voltage Resistive Divider[J]. Acta Metrologica Sinica, 2018, 39(1): 83-88.
[9]Deacon T A . Accurate (2 parts in 107) inductive voltage divider for 20~200Hz[J].Proceedings of the Institution of Electrical Engineers , 1970, 117(2):634-640.
[10]He X B, Zhang X. A new error compensation method of inductive voltage divider[C]//  Proc CPEM 2008. Colorado, USA, 2008:238-239.
[11]Homan D N, Zapf T L. Two stage, guarded inductive voltage divider for use at 100 kHz[J].ISA Transactions, 1970, 9:201-209.
[12]Hanke R. An improved straddling method with triaxial guards for the calibration of inductive voltage dividers at 1592 Hz[J]. IEEE Trans Instrum Meas,1989, 38(5):974-978.
[13]Zhang G M, Zhao F Z. Generalized Injected Voltage Method for the Establishment of Multidecade Inductive Voltage Divider Standard[J]. IEEE Trans Instrum Meas,1987,36(1): 9-12.

基金

国家重点研发计划(2016YFF0200105);国家自然科学基金面上项目(51877202)

PDF(1929 KB)

Accesses

Citation

Detail

段落导航
相关文章

/

〈 〉