采用GB/T 17657—2013《人造板及饰面人造板理化性能试验方法》中的干燥器法,对卫浴家具中人造板甲醛释放量的检测过程进行试验研究,并依据JJF 1059.1—2012《测量不确定度评定与表示》分析影响甲醛释放量测定的各种不确定因素,量化和评定各不确定度分量。结果表明:甲醛释放量为(1.06±0.05)mg·L-1,扩展不确定度的包含因子k＝2,其置信概率P=95％。经分析,由标准物质认定值和样品的重复测定引入的不确定度最大,其次为标准曲线拟合的变动性所引入的不确定度。
Abstract
The wood-based panel formaldehyde emission was tested by the desiccators method in GB/T 17657-2013 "Test method for physicochemical properties of wood-based panel ", the process of the detection was studied. All kinds of uncertainties were analyzed, which affected determination of formaldehyde emission and evaluated the components of uncertainty according to the JJF 1059.1-2012 "Evaluation and Expression of Uncertainty in Measurement" . The results showed that the formaldehyde emission was (1.06±0.05) mg·L-1, when expanded uncertainty coverage factor k=2, fiducially probability P=95％. The analysis showed that the uncertainty of the reference value and the repeated determination of the sample contributed the most, followed by the uncertainty which was introduced by the variation of the standard curve fitting.
关键词
计量学 /
甲醛释放量 /
干燥器法 /
不确定度 /
人造板
Key words
metrology /
formaldehyde emission /
desiccators method /
uncertainty /
wood-based panels
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
［1］刘园园, 杨健, 赵希勇, 等. GUM法和MCM法评定测量不确定度对比分析［J］. 计量学报, 2018, 39(1): 135-139.
Liu Y Y, Yang J, Zhao X Y, et al. Comparative Analysis of Uncertainty Measurement Evaluation with GUM and MCM ［J］. Acta Metrologica Sinica, 2018, 39(1): 135-139.
［2］GB/T 17657—2013 人造板及饰面人造板理化性能试验方法［S］.
［3］JJF 1059.1—2012 测量不确定度评定与表示［S］.
［4］王伟, 潘春秀. 光度法测定钢铁及合金中锰含量的不确定度评定［J］. 计量学报, 2005, 26(2): 189-192.
Wang W, Pan C X. Uncertainty Evaluation of Spectrophotometric Determination of Manganese in Steel and Alloy ［J］. Acta Metrologica Sinica, 2005, 26(2): 189-192.
［5］马振栋, 王凤池, 郝冬生. 高效液相色谱柱后衍生法测定黄曲霉毒素的不确定度评定［J］. 计量学报, 2002, 23(3): 229-240.
Ma Z D, Wang F C, Hao D S. The Uncertainty Evaluation of Determination of Aflatoxin by HPLC Post-Column Derivation Method ［J］. Acta Metrologica Sinica, 2002, 23(3): 229-240.
［6］范巧成, 匡荣, 马俊, 等. 试论测量不确定度与误差理论的关系［J］. 计量学报, 2017, 38(3): 380-384.
Fan Q C, Kuang R, Ma J, et al. On the Relationship Betwenn Measurement Uncertainty and Error Theory ［J］. Acta Metrologica Sinica, 2017, 38(3): 380-384.
［7］JJG 196—2006常用玻璃量器检定规程［S］.
［8］辜忠春, 李军章, 罗爱军, 等. 林产品检测中的数值修约及运算规则浅析［J］. 湖北林业科技, 2015, (6): 42-44.
Gu Z C, Li J Z, Luo A J, et al. Analysis on Rounding off for Numberical Values and Operation Rules for Forest Products Detection ［J］. Hubei Forestry Science and Technology, 2015, (6): 42-44.
PDF(360 KB)
