Abstract：During verification process of instrument error,the test results decide UUT qualified or not.Due to the presence of measurement uncertainty,a wrong decision may be made,so consumer and producer decisional risk are caused.To keeping the consumer,s risk(CR) and producer,s risk(PR) below the given target values,a comprehensive control method for setting both the process capability index(PCI),measurement uncertainty ratio(TUR)and gauging tolerance interval ratio(GTR)in conformance testing procedures is proposed.The relation between the three parameters with CR and PR is established.By graphical configuration mode,some effective guidelines for conformance testing design are described.The results of simulation show that PR and CR can be kept below the given target values by suitably setting both the TUR and GTR with a certain PCI.
［1］ Montgomery D C. Introduction to Statistical Quality Control［M］. Hoboken,NJ:Wiley,2004,56-68.
［2］ Castrup H. Uncertainty Analysis for Risk Management［M］. Anaheim,California:Measurement Science Conf,1995,338-364.
［3］ 殳伟群.测量不确定度比和单台仪器检定结论的风险关系研究［J］.计量学报,2007,28（1）:93-96.
［4］ Lira I. A Bayesian approach to the consumer′s and producer′s risks in measurement［J］.Metrologia,1999,36(5):397-402.
［5］ Carbone P,Macii D,Petri D. Measurement Uncertainty and Metrological Confirmation in Quality-Oriented Organizations［J］. Measurement,Elsevier science,2003,34(4):263-271.
［6］ ISO 10576-1:2003,Statistical Methods: Guidelines for the Evaluation of Conformity With Specified Requirements—Part 1:General Principles［S］.2003.
［7］ Fearn T,Fisher S,Thompson M,et al. A decision theory approach to fitness for purpose in analytical measurement［J］. Analyst,2002,127(6):818-824.
2013, Vol. 34 
