弹簧冲击器溯源过程中的碰撞接触力特性研究

doi:10.3969/j.issn.1000-1158.2024.10.12

摘要
图/表
参考文献(16)
相关文章 (15)

全文: PDF (444 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要为了提升弹簧冲击器校准装置溯源工作的测量准确度,完整评估其溯源工作中冲击端碰撞过程的能量损失,引入Newton恢复系数e,结合广义接触力模型对溯源装置的冲击端碰撞过程进行动力学建模并进行数值仿真分析。研究结果表明:考虑Newton恢复系数e时的最大接触力大于未考虑时的最大接触力,且随着Newton恢复系数e的增大,最大接触力呈现非线性增加;Newton恢复系数e对碰撞过程中的相对形变量几乎无影响;结合实验结果,当e=0.8时的仿真结果与实测值接近,相对误差约为2%。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	高建卓
	陈龙
	汪宁溪
	骆昕

关键词 ：力学计量, 弹簧冲击器, Newton恢复系数, 校准装置溯源, 碰撞力学模型, 数值仿真

Abstract：In order to improve the measurement accuracy of the spring hammer calibration device in the traceability work, and fully evaluate the energy loss in the impact end collision process of the traceability work, Newton restitution coefficient is introduced. And combined with the generalized contact force model, the dynamic modeling and numerical simulation analysis on the impact end collision process of the traceability device are carried out. The results show that the maximum contact force with Newton restitution coefficient is larger than that not considered, and the maximum contact force increases nonlinearly with the increase of Newton restitution coefficient, there is almost no effect on the relative deformation during the collision. Based on the experimental results, the simulation results are closest to the measured values when e=0.8, with a relative error of about 2%.

Key words： mechanical metrology spring hammer Newton restitution coefficient calibration device traceability impact force model numerical simulation

收稿日期: 2023-04-18 发布日期: 2024-09-30

PACS:

TB936

基金资助:国家市场监管总局科技计划(2022MK004); 北京市计量院自主科研项目(KJ2021-21)

作者简介: 高建卓(1992-),北京市计量检测科学研究院工程师,主要从事力学计量、机械设计方面的研究。Email: gaojz@bjjl.cn

引用本文:

高建卓,陈龙,汪宁溪,骆昕. 弹簧冲击器溯源过程中的碰撞接触力特性研究[J]. 计量学报, 2024, 45(10): 1520-1524.
GAO Jianzhuo,CHEN Long,WANG Ningxi,LUO Xin. Research on Characteristics of Collision Contact Force During Traceability Process of Spring Hammer. Acta Metrologica Sinica, 2024, 45(10): 1520-1524.

链接本文:

http://jlxb.china-csm.org:81/Jwk_jlxb/CN/10.3969/j.issn.1000-1158.2024.10.12 或 http://jlxb.china-csm.org:81/Jwk_jlxb/CN/Y2024/V45/I10/1520

［8］	马佳, 揭豪, 白梦昊, 等. 基于无量纲分析的法向恢复系数模型研究［J］. 力学学报, 2023, 55 (4): 982-990.
［12］	高建卓, 陈龙, 汪宁溪, 等. 基于响应面法的弹簧冲击器校准装置冲击端优化设计［J］. 计量科学与技术, 2022, 66 (9): 40-46.
［5］	王旭鹏, 林文周, 刘更, 等. 牛顿碰撞恢复系数评价下的碰撞力研究进展［J］. 机械科学与技术, 2020, 39 (10): 1526-1533.
［10］	王庚祥, 马道林, 刘洋, 等. 多体系统碰撞动力学中接触力模型的研究进展［J］. 力学学报, 2022, 54 (12): 3239-3266.
［11］	杨靖恺, 刘桂成, 付函, 等. 非结构化农业散粒物料间碰撞恢复系数测定实验平台［J］. 实验技术与管理, 2022, 39 (6): 109-114.
［9］	黄福有, 张路青, 周剑, 等. 基于摩擦与变形耗能的滚石切向恢复系数影响因素［J］. 地球科学, 2022, 47 (12): 4583-4595.
［15］	LANKARANI H M, NIKRAVESH P E. Continuous contact force models for impact analysis in multibody systems ［J］. Nonlinear Dynamics, 1994, 5: 193-207.
［1］	MEGALINGAM A, HANUMANTH R K S. A complete elastic-plastic spherical asperity contact model with the effect of isotropic strain hardening ［J］. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2021, 235 (4): 820-829.
［3］	MACHADO M, MOREIRA P, FLORES P, et al. Compliant contact force models in multibody dynamics: Evolution of the Hertz contact theory ［J］. Mechanism and Machine Theory, 2012, 53: 99-121.
	WANG X P, LIN W Z, LIU G, et al. Advance in impact force model research with evolution of Newton Restitution Coefficient ［J］. Mechanical Science and Technology for Aerospace Engineering, 2020, 39 (10): 1526-1533.
［13］	GOLDSMITH W. Impact: The theory and physical behaviour of colliding solids ［M］. London: Edward Arnold Ltd. , 1960.
［4］	SEIFRIED R, SCHIEHLEN W, EBERHARD P. The role of the coefficient of restitution on impact problems in multi-body dynamics ［J］. Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-Body Dynamics, 2010, 224 (3): 279-306.
［7］	GONTHIER Y, MCPHEE J, LANGE C, et al. A regularized contact model with asymmetric damping and dwell-time dependent friction ［J］. Multibody system dynamics, 2004, 11: 209-233.
	WANG G X, MA D L, LIU Y, et al. Research progress of contact force models in the collision mechanics of multibody system ［J］. Chinese Journal of Theoretical and Applied Mechanics, 2022, 54 (12): 3239-3266.
	YANG J K, LIU G C, FU H, et al. Experimental platform for determination of collision recovery coefficient between unstructured agricultural bulk materials ［J］. Experimental Technology and Management, 2022, 39 (6): 109-114.
	GAO J Z, CHEN L, WANG N X, et al. Optimal design of the impact structure of spring impactor calibration device based on response surface method ［J］. Metrology Science and Technology, 2022, 66 (9): 40-46.
［2］	BONARI J, MARULLI M R, HAGMEYER N, et al. A multi-scale FEM-BEM formulation for contact mechanics between rough surfaces ［J］. Computational Mechanics, 2020, 65 (3): 731-749.
	MA J, JIE H, BAI M H, et al. Research on normal restitution coefficient based on dimensionless analyses ［J］. Chinese Journal of Theoretical and Applied Mechanics, 2023, 55 (4): 982-990.
	HUANG F Y, ZHANG L Q, ZHOU J, et al. Influence factors of tangential restitution coefficient of rolling stone based on friction and deformation energy dissipation ［J］. Earth Science, 2022, 47 (12): 4583-4595.
［14］	HUNT K H, CROSSLEY F R E, CROSSLEY E. Coefficient of restitution interpreted as damping in vibroimpact ［J］. Journal of Applied Mechanics, 1975, 42: 440-445.
［16］	李逸良, 邱信明, 张雄. 恢复系数的不同定义及其适用性分析［J］. 力学与实践, 2015, 37 (6): 773-777.
［6］	FLORES P, MACHADO M, SILVA M T, et al. On the continuous contact force models for soft materials in multibody dynamics ［J］. Multibody System Dynamics, 2011, 25 (3): 357-375.
	LI Y L, QIU X M, ZHANG X. Different definitions and corresponding applicabilities of the coefficient of restitution ［J］. Mechanics in Engineering, 2015, 37 (6): 773-777.